Demand on wood product. Business idea - production of furniture made of natural wood. Handmade souvenirs

If there is a dream cut out of the tree of the product and make money on this money, you need to study the theme from A to Z. All links of the chain are important: the room under the workshop; equipment, tools and machines; Purchase of raw materials; assortment of products depending on demand; Business Nuances. But everything is in order.

Let's figure out what a joiner and mandatory qualitieswhich they must have.

Basic wood processing operations are performed manually using tools and special machines. Depending on the types and quality of work, the qualification of the joiner is determined. There are discharges from 1 to 6.

The joiner should understand the device of electrical machines and tools, machine tools for wood processing and distinguish wood. Know the ways of making parts or entire products, be able to carry out their installation or repair. We also need knowledge for maintaining technical documentation. Consider the safety and safety regulations.

The elite among the joiners is considered to be cabinetries. Not every joinear can become them, but each cabineturist is studying the skill of the joiner necessarily. Modern masters Made up high-class furniture from expensive wood breeds, according to copyrighted sketches. They have increased concentration and responsibility. Work with expensive materials and rarities. The cabinetor must draw well, draw and make layouts. Works of such masters, expensive interior items or antique restorations at the end represent cultural value

Individual features of a specialist of this profession are not unimportant. Physical strength, perfection, concentration of attention, scrupulousness, endurance and agility - characterize wood wizards. There are medical testimony and warnings in a joinery. Do not do without a good eyelasier and vision, coordination of hands, the ability to efficiently work for a long time, visual memory and developed imagination. This profession is not recommended for diseases of the eyes or musculoskeletal system.

Where to start your carpent business

There is education, developments, a great desire to do a loved one and get income. Important moments are defined:

Whether a closed production cycle is planned when the start from drying wood and the end to paintwork works in one workshop.
For whom products will be made, their quality and material, the corresponding tool.
Production volume, single - to order, small-sector, mass.
Possible amount of costs for the project.

There are several tasks, the execution of which will lead to success:

Task first - explore the future market. Visit fairs, exhibitions, bazaars, talk personally with sellers, owners of small shops or managers of large firms. Determine which products are most popular, in demand every day, and which are rare, but are expensive. Learn what products greater demand.

Task Second - Decide on the direction of work. Clearly appreciate your skills and decide what will focus. Competitive qualitative or original unusual products is an important decision. For the hardware of the cabinet, expensive non-standard orders are possible, which are more laborious, but also highly paid. The joiner is a cutter on a tree, will be able to make furniture or other elements of the interior, which are also not cheap. Even a novice carpenter is not a high category will be able to make money on the manufacture and fixation of construction equipment or simple parts, due to their number and speed. In accordance with the direction of the work, a business plan is drawn up.

Task Third - place under the workshop. After the critical assessment of its abilities and opportunities, the area of \u200b\u200bthe future enterprise is determined. Place for work, recreation and meeting with customers. Since some work will take away all free time and will be able to restily only, without departing from the workplace, the room must comply with all the requirements for the implementation of plans. To begin with, in most cases, inexpensive and simple technologies are preferred. Recommended Area 50-60 square meters, the height of the ceilings is at least 4 meters, it is possible to process high products for processing. The territory of storage of semi-finished products is taken into account before the start, and finished products after the end of work. Dry and bright room - prerequisite. Maybe. It will be a garage, a barn or a basement with good lighting. Use electricity is preferably 380 V, but can begin with 220V. The work of the joiner involves the risk for eyes and hands. And monotonous movement, repeated multiple times lead to the diseases of the neck, back and joints. Given these moments, you should not forget about the prevention, safety technique, preventive measures. Mandatory documents for inspectors, in the fire service

Task Four - registration of IP. Small carpentry enterprises, without employees and active advertising themselves on radio and in newspapers, can do without registration of IP. Once a year to submit a declaration about income and pay taxes. But such behavior can be understood as evasion from paying taxes, which is fraught with penalties. Unregistered businessman does not pay deductions to pension Fund And reduces the size of its future pension. Therefore, it is better to register your individual enterprise.

A start. Getting to choose equipment

The key to the success of any carpenter is high-quality and powerful machines, convenient and appropriate tools selected work.

The choice of equipment is the individual depends primarily on the quality of future items, then from the planned volumes and finally from the assortment. Currently, most entrepreneurs enjoy imported equipment, although reliable, "eternal", Soviet machines, such as milling, are preserved. You can buy a whole set of expensive tools and cars or to start selectively buy used cars, and something to try to make it yourself. What will save money without harm to the quality of future products. On the Internet there are many drawings and tips and reference books for the manufacture of joinery machines, but some on which it is not recommended to save, you will have to buy. For the manufacture of carpentry products, all varieties of woodworking machines are applied.

For the manufacture of windows, doors, furniture It is possible to choose equipment in the middle price category, such as:

Pleismus
Circular Machine
Grinding
Crucibles
Calibration-grinding
Crafting table;

Do you buy a ready workh or do it yourself homemade, make sure that it is hard enough, has a smooth working surface and at least one powerful vice.

Vice;
Lathe;
Ribbon machine;
Planer;
Milling machine;

You can enhance the functionality of the freesomeer by fixing it on the table, for beginner masters, it is impossible for the way this location is suitable for processing small blanks.

Disk or end saw (for small billets);
Corner centers - special machines for profiling and making frames, stroke formation. Conditioning 90 degrees are directed to the manufacture of windows and doors.

A novice entrepreneur will most likely be engaged in individual production, where it is not necessary to do without universal, rapidly tunable machines. If it is necessary to work in a small place, the multifunctional center will become indispensable. It combines the work of several cars at the same time and saves the space of the workshop. Woodworking center with dimensions of about one and a half meters. Cut operations, planing, milling, reysmic processing, drilling, grinding - replace the use of several machines.

In the market of woodworking equipment, several European verified firms can be distinguished: Weinig (Germany), SCM (Italy), Rojek (Czech Republic), Sicar (Italy), Houfek (Czech Republic) who have a good choice Verified and high-quality equipment.

Rules for placing machines, the sequence of their location also matters in the work

An example of the correct placement of machines for the production of a wide range of joinery:

Circular saw (for example - format-loose.)
Tracing machine;
Fugoval machine;
Raysumovoy machine;
Ribbon machine;
Milling machine;
Four-sided planer;
Drilling-groove machine (groove compounds of blanks);
Machines for working with veneer - (they cover inexpensive wood with more valuable varieties)
Hydraulic press (for coating veneer)
Grinding machine ( the best way - calibration and grinding.)
Finishing place where primer, varnishing, painting

For high-quality and holistic work of the joinery workshop, important tools are needed.

The organization is very important, keep the tools in order and materials in your place, it saves the time to search for the necessary things, strength and does not distract from the creative process.

Use the Masters of the Wipers a lot of manual tools, they need to know well. We use:

measuring tools - roulette, caliper
drill;
screwdriver;
electrolovik; ;
moisture meter;
roulette;
calipers;
electric choke;
fan with bags for organizing opidual.

Sometimes manual tools It turns out to work faster than electric. Hisching to cut the ledge or the plane to remove the chamfer will take less time than using the machine and install, setting the mill.

It is possible to take everything you need for hire. Under time, this will help faster to start work and get the first profit to improve their enterprise.

Yours workplace It will consist of a desktop. It accommodates equipment and the necessary tools, equipment and fixture.

It will be necessary will be special clothing - a bathrobe or a special costume with sleeves, gloves and eye mask will be able to protect health and secure the wizard.

Always replenish the reserves of essential items on time: pasta cleaning paste, bilateral scotch, magnifier, tweezers, fire extinguisher and first aid kit.

Choose a tree

Qualitative raw materials - a pledge of a functional and demanded finite product. To have a representation which tree to use for your orders is needed in advance. There are standards established by the state, strict dimensions and requirements for lumber. Professional joiners are well acquainted by gostami. For a novice carpenter - a businessman has a fairly general information.

A tree as a material can be divided into two forms:

source - logs, branches, roots, forest-rounding;
secondary - boards, timber, plywood, chips, veneer, and so on.

By fitness for the production of joinery, wood is divided into rocks:

soft (pine, spruce, fir, cedar, poplar, linden, iva, alder, chestnut, nut);
medium hardness (larch, tes, birch, beech, elm, pear, oak, maple, fence, rowan, apple tree, ash);
solid (white acacia, Birch Iron, Grab, Samshat, Pistachio, Dogwood, Oliva)

The characteristics of wood are also taken into account:

presence or absence of defects
humidity
ripeness or not ripeness (ability to ship), etc.

Tree structure:

light
swearing
layered
amorphous

Quality affect the processing process. They need to know and take into account.

Soft breeds are ideal for thread. A hand with a tool moves freely and easily. The average hardness depends on the place where the tree grew (mild or cold climate), the characteristics of the structure (many or few bitch), etc. The most difficult way to work with solid wood - for this, efforts are needed in production and skills.

Wood inside the trunk, no longer called the kernel, but a layer of cells around, where the juices are circulated - the swamp. The kernel is the hardest part of the trunk, the most dense and resistant to rotting. Given the structure of the kernel and Collus, the tree is divided into 3 such groups:

Sound- Dark color is formed when dying in the kernel in such trees as oak. Juniper, larch, ash, cedar, pine, apple tree;
Spellers - The color of the crook and the kernel is the same in ate, aspen;
Zabolovy - Does not die on the tree in the center of the maple, linden, pears.

Wood properties directly affect the quality of the product, its decorative appearance and simplicity in the manufacture. It is important to know and over time to determine the preset rock, age, tree properties. Understand your capabilities regarding specific species The material and in the future are not disappointed, in obtaining the desired result.

Defects in trees

The most common flaws of wood that lead to marriage are:

cracks (possible with growth during frosts or drying);
knots;
wormochin (insect damage);
rot;
fungi;
non-standard shape of a barrel or wood.

Slops on trees, the so-called kapa give the unique texture of the material and are expensive, so nuts are evaluated as all the wood of the dear Karelian birch. Sometimes not a standard discarded piece of wood can become an original product depends on the skill and fancy of the wizard. So the cabineturists estimate the tree on decorative qualities - color, brilliance and texture.

Disadvantages and vices of wooden materials can be used in the manufacture of a creative functional object and turn into dignity.

Knowledge of the available and common wood breeds will help to configure advantageous offers. Saving on unedged boards from local sawmills. Even a newcomer in joinery needs to be learned to distinguish the sawing methods. The boards of radial cut more expensive the rest and give the least all waste. Tangential cut - cheaper, but also tend to breed and give waste. There is also mixed cut.

You need not to forget about accessories, varnishes, paint all that will help to make a workpiece into a ready-made product.

Production and sales. Successful advertising - the key to successful sales

Before starting any work, a sketch or sketch of hand is made to the eye. In it, the master offers the idea of \u200b\u200bthe future product. If the option is suitable for the customer, the drawing is done according to accurate allocated sizes. The image of the model from above, in front and on the side, is possible a view in the context. In most cases, a millimeter and a simple pencil is used, which makes it possible to correct the drawing in the process. In parallel, materials and expenses for the upcoming work are calculated.

Competent organization of sales of products directly trade enterprises will significantly promote the case. Specialized shops, supermarkets, markets - potential customers for any novice carpenter.

Joiner's products are mainly calculated on the mass consumer, advertising should also cover as many people as possible. Such methods will help:

creating your site and its promotion;
activity in social networks, the presence of its popular group;
buy banners from search engines.

Here you can lay out good photos Your products describe in detail your work and specify contacts. And some clients can attract ads in promotional publications.

But it is not always easy to make competition in modern business, it will help not a standard approach to business. Original products, such as souvenirs, talismans, toys and carving are popular with buyers. Will benefit as additional direction Work.

The idea of \u200b\u200bthe popular overega "Wood" with a simple design. The birch deck is cut in half with the figure of the spirit-house inside, it will protect against negative and evil forces. Oberega feature - instruction how to knock and communicate with the Spirit.

Consumer attention attracted originality and creative. Successful ideas for the manufacture of barrels for wine or chests in the interior - found their use and bring good income to entrepreneurs. Another unusual direction in parallel with the main work and on the territory of the workshop can be organized. School or lessons for those who want to try themselves in a joinery. Master classes - permanent income and advertising.

Consumption and income

For accurate calculations, all data of a particular project is needed, but an exemplary income plan can be made for any, small joinery. Consider 2 options: a small firm and enterprise bigger.

Expenditures respectively business plan 1. There will be such:

renting the room, if there is no one own up to $ 200;
tools and equipment, depending on the type (new, used, rental or manufacturing with your own hands) from 2000 to $ 6000;
lighting of the room, electricity from $ 20;
materials up to $ 300

Provided by its premises, expenses will be reduced.

On the example of the manufacture of doors - a simple product, consider possible profitability.

Master without experience make 8-10 doors per month. You will need 2 cubic meters of wood. Cost $ 300. Price per door 100 $ \u003d 1000 income. $ 700 will be net income. This is a minimum, since the experienced master makes more products.

To open its small carpentry business, you will need $ 6520 (maximum). Net profit of $ 700 per month. Payback period - 10 months, which is very good in the conditions of the modern economy.

Expenditures respectively business plan 2.:

Rent workshop - $ 500
Equipment, machines - $ 6100;
Tools - $ 2,800;
Tree Materials - $ 13,000
Transportation - $ 1700
Individual business registration - $ 700

Attachments are not small -25200 $. When loading equipment by 50% and the operation of 24 shifts for 8 hours. For a month, manufacture 38 doors and 75 window blocks at a price of $ 183 and $ 204 per square meter, you can earn $ 22275

Cost price:

Door blocks - $ 110 per meter square;
Window blocks - $ 204 per meter square;
Total cost For the month - $ 15300

Add mandatory costs for:

Sales payment for 2 workers and owner, we consider 5 days every week to 8 hours. $ 2562;
Workshop rental cost - $ 500;
Dependents in the funds, administrative costs - $ 1190
Sum permanent expenses 4252$
We get a profit - $ 2749

When saving all these conditions, such more large enterprise For 9 months.

And in conclusion about the fashion and trends. In trend Hand- Made and Eco. Environmentally friendly business from products before decorating interiors goes to the fore. Furniture made of wood is guaranteed to be in demand. Manual work on small objects of life brings part of the soul of the wizard in the product. And more and more willing and able to afford, people strive for unusual, original solutions, sizes and external qualities Interior items.

Perform order by affordable prices Not to the detriment of quality now allow direct supply of materials and accessories. The tree creates a comfort in any room. Wood frames are more environmentally friendly, and some item cannot be made from other materials other than a tree. Even in the office of the headset office, handles, wood shelves, create style and comfort and comfort. The Customer can come to a small carpentry workshop with a finished project or with wishes in words and professional carpenter implements his dream to reality. From furniture for home, firms, cafes, restaurants to items for presentations or solemn events.

Many experienced masters willingly share their knowledge with newcomers. Spend a short time on a conversation with a colleague will help in mastering complex work processes. You can take part in the Internet - discussions, forums and communities.

When the master works for himself, he constantly studies something new, develops creatively given to his beloved business. The best motive for achieving success has its own business.

Currently, the world is very fashionable to make various types of decorative and applied arts. After all, it is this art that helps a person to show all his talent and skill. Of natural materials You can make the most real and interesting masterpieces that will like everyone. Among the varieties of decorative and applied art there are wood carving. This type of activity occupies a special place in folk creativity. Yes, and it is not at all surprising, because in fact it has special properties that allow a person to make the most unusual and incredible things. Products can be the most different, from the simplest to the most difficult.

It is worth noting that this kind of art goes to the distant past. Previously, almost all people could do something unusual from such a material. Currently, few people are engaged in this and artisans left very little. But recently this species has become gradually reborn. The ideas of wood products are very much, and they are all different. Here you can find out the tips and recommendations.

Threads can be seen everywhere, for example, boxes, chess, backgammon, frames for paintings, mirrors, photos, doors, cabinets and more.

How to open a business on wood products?

Before opening your business on wooden products, you need to explore and view the demand for them.

In fact, great demand for thread only abroad. It is because of this that it is important for the beginning to find a firm that will be a mediator and engage in the buying job. In this case, the business will flourish.

Each person knows that wood is well processing and with the help of it you can easily create a variety of products. Ideas inspire a person to some new achievements. And another carving business can be organized at home.

Back to the category

What instruments need?

In order to start doing a car thread, you need to purchase special tools.

But the standard set, which can be made of wood products: two chisels, four special knives, a wooden hammer, four punch rods.

Its very easily can be found in a food store either on any flea market. But also, to make products made of wood, you need to buy files, a set of incisors, jigsaw, two drilling machines, a circular saw. Everyone agrees that business is ideas.

In order to make wooden products, it is necessary to have a workplace, it should consist of a good sustainable table and stool. It will take additional lighting, such as a table lamp. Its power must be somewhere 75 watts, it is necessary in order not to spoil your eyesight. Business ideas are very difficult, because you need to think through every item.

Over time, business on the tree will develop, and therefore it will be necessary to purchase a carving machine. This machine should be with numeric and software control. It will help to carry out your ideas and create even more interesting wood products. Ultimately, this should lead to a significant increase in profits.

Business with the help of these machines begins to flourish and grow, that is, produce more product. In wood carving, there can be various ideas that will help to sell the products faster.

Finished products can be sold through souvenir shops and various art departments. It is there that they can be reckled for a very short time. The cutter will invent new ideas and embody them in their works. In addition, to sell work, you can train wood thread skills at home. I will like the idea very much.

Sometimes the money is lying with us right under your feet, you just need to see them on time and competently master. So there are smeared entrepreneurs. As an example, take work with wood and waste from its processing - sawdust. In this article, we will tell you what can be made of wood and sawdust

What can be made of wood - business ideas

Woods of various breeds are widespread in all regions of Russia, with the exception of separate arid places or areas with unfavorable climatic conditions. But even where the tree is not mined, it can be processed.

That is why business associated with the tree is sufficiently developed in Russia. Below will consider the most relevant areas of production activities for small businesses and microenterprises.

It is necessary to make a reservation that under the tree is understood not only an array, but also slab materials (plywood, OSP, chipboard, etc.).

Production of furniture from chipboard

This is probably the most popular realization of business ideas from a tree. If you want to sell for sale in large trading networks, furniture stores etc., it will have to significantly invest in the equipment, with the trained personnel there should be no problems (the complexity of the work is low).

The minimum equipment (taking into account the existing dimensional premises for processing, storage of materials / finished products):

Sawing machine - from 500,000 rubles (used without feeding sheets, two people need for service).
Edge (edgebanding machine) - about 200,000 rubles. (These are manual models without automatic feed feed, only for direct faces).
System of dusting (extract for sawdust) - about 70,000 rubles.

At first, with small amounts of orders and simple parts, the additive can be performed by manually drill, sharpening the saw disks to perform a fee in the appropriate workshops.

Business ideas in the sports industry, sports and physical education

Subsequently, the CNC machine may be needed (to perform an additive under loops, fasteners, etc.), a computer with a licensed operating system and a scheduling program (minimizes the consumption of materials and staff action), printer (for printing orders) and other Auxiliary equipment.

In the market you can find advantageous comprehensive solutions to equip sawing workshops, such as used machines left after their replacement to more modern and technological.

The quality requirements of the saw and the possibilities of the equipment are formed by the alleged audience (budget furniture and warehouse equipment from chipboard do not assume high accuracy and complexity of cuts, etc.).

Production of garden furniture

When using the finished sawing material (timber, boards, etc.), you can refuse format machines. The edge equipment for the array is also not needed. Thus, on starting equipment, you can save significantly.

For such a business with a tree (array), the following tool will be sufficient to begin with:

Circular saw (from 2000 rubles).
Drill / screwdriver (from 1200 rubles.).
Planned (from 1300 rubles).
Ribbon grinding machine (from 2000 rubles).
Consumables, fasteners.

Of course, a spacious room is required and good workbenches (the latter can be made of the array with their own hands). If the furniture is to be treated with paint or protective compositions, to speed up the process, it is best to purchase ankopult and compressor.

The stake in the implementation should be done on the retail buyer. Than the original will be appearance Tables, shops, canopies, etc., the higher the demand will be.

Production of souvenirs and crafts from wood

Due to the small size of products (which involves minimum costs The source materials) at a sufficiently high pricing price (according to the ratio of the finished product to the value of the expended materials and the production time of the craft), you can find the right balance of costs and the resulting profit even with a small amount of sales.

Business idea: car stickers

At the initial stage, the entire range can be made with your own hands, and when increasing the volume of supplies, gradually hire staff and remove production to flow.

Taking into account the initial investments, this is the most real business idea with minimal starting capital. The main problem is the sale of goods. To obtain stable demand, you need to analyze the market for the presence of a need for or another crafts. You can bet on the possibility of remote sale (for example, via the Internet), if in your city / region souvenir products poorly developed.

The initial set of tools depends on the type of product, but with the right approach you can fit at 20-30 thousand rubles.

Here is just a small list of ideas for souvenir products and crafts:

Plates for baths / saunas
Matryushki
Wooden dishes, cutlery
Frames for photos
Alerts, Talismans, Decorative Figures
Combs, hairpins, beads
Patterns for seats
Original handles, pencils
Chests, boxes, kittomics, boxes, etc.
Covers for smartphones, tablets
Garden tracks
Children's toys, cubes

What can be done from sawdust - business ideas

If you have access to large companiesWood engaged in processing, make sense to think about the sale of the waste of their production - sawdust. What is good in the wood so this is that even waste can be used for production different species Products. Various business ideas from sawdust Consider below.

Fuel production from sawdust (briquettes, granules, pellets)

For business launch, only the corresponding production equipment, sawdust and room are needed.

Granulation press will cost about 150 thousand rubles. (for example, MZLP 200, SKJ2, MP-5, etc.) or higher (separate finished high performance lines reach 3 million rubles. and more).

LG announced the classic model of smart watches Watch Urbane

It will be easier to establish sales when interacting with sellers of solid fuel boilers of long burning. With small amounts of deliveries, only local sales are possible without sending fuel to other regions, so the idea is not profitable in the village where solid fuel boilers are not used.

Production of oproblok

Alternative building materials are increasingly in demand. Blocks made of concrete and sawdust are environmentally safe, have low thermal conductivity, withstand heavy loads.

Production of such blocks in large volumes (for sale through networks of building stores, etc.) requires serious production facilities, which involves a large starting capital for the launch of the production line (from half a million rubles).

As part of the private production (for local sales in the local construction market), it is possible to start with the purchase of concrete mixers, the vibration seal and several dozen forms for filling the blocks. All this will cost about 50,000 rubles.

The calculated value of the final block should not exceed the cost of other blocks building materials The same volume available on the market (for example, gas-silicate, polystyrene bonts, etc.).

Feline toilet filler

For the start of this business, there are practically no investments other than consumables on labels, packaging and advertising. Provided that the initial quality of sawdust is suitable for you (by fraction).

The smell of treated tree and the noise of woodworking machines attract many men. The joinery craft is in demand for many centuries, from the moment the person learned to process a tree. Manufacture wooden products - Honorary and respected profession. Even today, joinery products are in great demand, despite the "wave of popularity" of plastic products. Joiner's workshop as a business with their own hands can be a source of high income and stable profits. Below we suggest to consider how to open a similar enterprise and determine with the best development strategy of this business.

Wood decoration is one of the worst crafts of the world.

What does joiner's business look like

Joiner's business is an enterprise for men with certain skills and qualifications. To date, there are two main strategies for the development of carpentry business - art and technical. In order to determine in which direction it is necessary to develop, the market should be carefully analyzed. It is important to note that the above directions have a number of characteristic differences, which affects the sum of the initial costs.

Technical Direction

With the technical warehouse of mind or the availability of engineering education, it is best to develop in this direction. Window frames, interior doors and wood furniture are very popular with the consumer. Mass production of utilitarian objects can bring good income and quickly recoup the initial investments.

Working out a business plan for a joinery workshop, it is necessary to take into account the high level of competition. At the initial stages of development of its own enterprise, it is quite difficult to compete with workshops engaged in production on a large scale. In order to take their own niche, it will be necessary to find not only the sales market, but also organize the supply of high-quality and cheap raw materials. Similar searches can delay until six months, so when calculating financial investments, Possible downtime should be taken into account.

In order to attract the attention of a potential audience, it is necessary to arrange an advertising campaign. Consecration of the opening of your workshop in the media, placing advertising in newspapers and the Internet - will require significant investments. In order to profit in the first stages of the company's development, it is necessary to have enough experience in the field of woodworking. Useful connections and knowledge of all nuances of the organization manufacturing process Allow tight stand on the legs into a difficult crisis time.

Artistic direction

Traction for creativity and ability to keep a joiner tool in the hands, can also bring solid profit. Beautiful wood products - always have increased demand. Various key rings, souvenirs, caskets and crafts made of wood are in great demand. However, opening a similar case, it is not necessary to focus on mass production. The main plus of this area, the lack of the need to implement financial investments for advertising campaigns to attract customers.

In order to establish the sale of finished products, you can conclude a contract with small stores engaged in the sale of various souvenirs. This business development strategy does not require major financial costs at the initial stages of their own business. A similar business is most often interested in people who have a tendency to work, put the issue of profit into the background. A constant striving for self-improvement and a creative approach to the manufacture of wood products can bring a rather tangible profit.

Tree products are inherent in their own character, which attaches not only an apartment, but also the very office of comfort and harmony

Opening of the joinery workshop for furniture

In order to open the workshop for the production of window frames, interior doors and other items made of wood, serious production facilities will be required. It is necessary to accommodate to hiring staff and search for the premises. To open a similar enterprise, when budget is drawn up, you should not forget about the cost of registration in the tax authorities and the PR company.

For the purchase of woodworking equipment for the production of furniture, 1,000,000 rubles will be required. This money will require to purchase several machines (drilling, tracing, milling), circular saw and flight. Since in the production of furniture, the ability to use solid materials is missing, you should take care of the acquisition of a gluing weight. An ideal solution for accelerating the production process is the acquisition of pneumatic equipment.

Production of wooden products - labor-intensive processrequiring increased attention to the aesthetic attractiveness of finished products. In order to give a product product, a grinding machine is necessary. When developing an enterprise in the technical direction, a painting shop should be organized. For equipment of such a workshop, a separate room is needed equipped with a spray and compressor.

Select room

Carpentry shop wooden furniture It has certain requirements To the area of \u200b\u200bthe room. To create a workshop aimed at mass production, it is necessary to premire an area of \u200b\u200bat least two hundred square meters. Here you should equip:

workshop where products are manufactured;
premises for painting finished products;
dressing room;
bathroom and warehouse;
lounge room for staff (can be combined with locker room);
tool room.

Finding such a room is quite difficult. When searching for rent, it is necessary to take into account its location and the degree of development of engineering communications. The average cost of the monthly rental of such premises is about 100,000 rubles.

A carpent business entrepreneur has a wide range of choices, the main thing is not to be mistaken

Staff

Equipment for carpentry workshops - only a small part of the initial costs. The main emphasis when drawing up a business plan should be made on staff. When opening a similar enterprise, the initial team should include seven people. For mass production of wooden products, three carpenter will need with the presence of rich experience in this area. They should be highlighted with two handymen, who will take auxiliary work.

The painting shop should be trusted only in the hands of a real professional. This moment is one of the most important in the organization of the joiner's workshop. A painting with the lack of necessary experience can cause much harm that the financial losses suffer.

The organization of industrial duties should be engaged in a person who has experience in personnel management. The head of the workshop must impose all responsibilities for organizing the production process. The main duties on the distribution of profit and other financial issues Must take accountant. In order to small financial economies, you can hire a coming specialist.

Middle level of financial expenses for staff work production workshop It is about 200,000 rubles per month. If desired, reduce such expenses, you can try on the role of the head of the enterprise. However, it must be borne in mind that this role We will have to combine with the search and an increase in the client base.

Sales market

Wooden crafts handmadeAs well as mass consumption products, require a responsible approach to an advertising campaign. Properly conducted PR campaign will encompass a wide audience. To date, the Internet is one of the most powerful tools for promoting the market.

In order to declare yourself, a special website is needed, where it will be advertised. finished products. It is best to attach an online store to this site, in order for potential customers to have the opportunity at any time purchase a finished product. An important role in advertising is played social networks. In order to obtain a wide consecration of its activities, you can purchase advertising banners from popular search engines.

Don't forget about traditional advertising campaigns. The media and outdoor advertising - still do not lose their positions. The average cost of advertising and placement on information boards is about 5,000 rubles.

Guarantor of Success - Your Hands, Experience and Skills

Profitability of joinery business

Considering the business plan for the opening of a joinery workshop, special attention should be paid to the profitability and payback period of the enterprise. In order to purchase the necessary woodworking equipment, 1,000,000 rubles will be required. To this amount you need to add tax expenses and spending on the collection of all necessary documents - about 100,000.

Next, you should take care of the long-term rental of the premises. The average cost of the half-year rental of premises in 200 squares will cost 600,000 rubles (from the calculations of 100,000 to one month). Monthly spending on salary to employees account for 200,000 rubles (1,200,000 - at the rate of half a year).

It is also necessary to not forget about investments on the purchase of consumables. The average cost of "consumables" for the joinery workshop is 100,000 rubles. Thus, the sum of the initial investments is 2,900,000 rubles. And now, let's consider the profitability of the joinery shop.

An experienced master can produce products worth 10,000 rubles, while registering essential materials. Based on this, we can say that with the full load of the enterprise, in one month the joinery shop can bring profits in the form of 600,000 rubles. Half from this amount goes on the purchase of consumables and labor payment. Approximately fifteen percent of the remaining amount will go to pay tax contributions, medical insurance and payment communal services. As a result, the total amount of pure income is about 200,000.

Based on this, it can be said that the payback period of the joinery workshop is about fifteen months, when taking into account the permanent availability of orders. During downtime, the payback of such an enterprise may take several years.

Opening of an art carpentry workshop

Wood joinery with their own hands for sale can also be a source of permanent profits. Despite the modest cost of such crafts, the return on the enterprise is less than a year. It is very important to properly approach the manufacturing and sale of finished products.

In increased demand, various caskets, key rings and jewelry are used. For the production of similar little things, large production facilities are not needed. However, to open a similar workshop in its own apartment is quite difficult. Most woodworking machines make a strong noise, and the wooden sawdust and wood dust themselves require a strong exhaust. Given these nuances, the acquisition of a garage will be the ideal solution for opening an art workshop.

Joiner's workshop in the apartment - a bad version: Little spaces, and noise and dust - a lot

The joinery in the garage must be properly equipped. Despite the fact that some products can be built by conventional tools, you need to take care of the purchase of woodworking equipment. At the initial stages of development of this case, it is necessary to have a drill, engraver, drilling and universal woodworking equipment. The average cost of such a set is 200,000 rubles.

Additional expenses

I intend to make wooden products with your own hands for subsequent implementation, you need to think about the development strategy in advance. If you are going to independently engage in the manufacture of goods and do not see the need to hire additional personnel or advertising, then at the initial stage you can do without registration in tax authorities. Many novice entrepreneurs are limited to the income declaration.

It is important to note that such activities can be regarded as an attempt to deviate from taxes, which will entail fines. It is also important to note that the unregistered person does not carry out deductions to the Pension Fund. This means such an approach significantly reduces the size of the future pension. Based on this, it should be noted the importance of the registration of IP. The cost of registration is about 3,000 rubles. The amount of tax fees can be about 5,000 per month.

Profitability

The art workshop does not require large financial investments, which allows for a short time to recoup all expenses. For opening similar business, It is necessary to have an initial capital equal to 300,000 rubles. This amount will be required to purchase. necessary equipment, premises and consumables. The average income from such an enterprise is about 50,000 rubles per month. In order to recoup your business, you will need less than one year.

In contact with