Sample of technical specifications for products pdf. Ready technical conditions

For reference only

(TU) are required for the production of products for which there is no specific GOST. establish the requirements of the TU developer for the product. The presence of technical specifications is necessary to obtain and. On the Internet you can free download technical specifications to familiarize yourself with this kind of document. are developed by the decision of the manufacturer, they should not contradict, on the contrary, when developing, it is necessary to adhere to the requirements of GOST R. They are developed taking into account the type of products manufactured, technological process, used equipment and other important components of all production, packaging and storage. the manufacturing company itself can be engaged if the staff of employees has a sufficiently competent and experienced representative who could be entrusted with such a responsible business. If the manufacturer is interested in obtaining technical specifications, high-quality and competently drawn up, completed in a short time, it will be advisable to entrust this procedure to professionals. Qualified specialized employees are always ready to help you in the development of technical specifications for almost any product. GOST TU can be developed for one specific product, material, substance or for several products, materials, substances. Technical conditions are always developed for a specific production and are the intellectual property of the manufacturing company that developed them. therefore free download technical specifications from the Internet and use them in another production is illegal.

The procedure for registration of technical conditions.

- a document defining the parameters, properties and characteristics of products, requirements for its manufacture, quality control and acceptance. The data indicated in the technical specifications must correspond to reality. are developed for specific products of a specific manufacturer. After that they must be registered and entered in state Register technical conditions. Installed procedure for registration of technical conditions involves the submission of the following documents:

technical specifications and changes to technical specifications (2 copies - original and copy);
covering letter drawn up on the letterhead of the organization (1 copy);
a copy of the certificate of registration of a VAT payer or a document confirming that the organization is not a VAT payer (1 copy);
copy of the conclusion on the approval of technical conditions (1 copy);
copies of all other documents on approval (1 copy);
product catalog card (2 copies);
copy of the agreement (license) for the use of technical specifications by foreign organizations (1 copy).

To register technical specifications for food, alcohol and tobacco, a list of materials, components and raw materials that are used in the production process and a copy of the conclusion for food materials, components and raw materials must also be submitted. and their entry into the register is carried out by organizations accredited by Gosstandart. Registration of technical specifications must be regional, that is, at the place of registration and location of the manufacturer. When registering technical conditions, their title and catalog sheets are stamped and marked by the registering organization. According to the registration results, the technical conditions are assigned an individual number.

GOST Specifications - packaging products.

Packaging is essential for the quality and safety of packaged products. Therefore, the consumer often pays close attention to the packaging: its appearance, integrity, clarity of images, etc. Some materials used to make packaging can be hazardous to health. Information about the toxicity of certain components should be placed on the packaging to warn the buyer about the possible danger. The quality of packaging is determined by a specific GOST R or must comply with the requirements of this GOST TU. The type of packaging depends on the type of packaged product and its purpose. When created and the material from which it is made, must be indicated by the manufacturer of the product. - technical paperthat specifies the requirements that the product must satisfy. In order to develop technical specifications, you must have the following information:

manufacturer's OKPO code;
Full name of the head, developer;
name, appearance products, list of modifications;
technical description technological process;
table of technical parameters (as complete as possible);
list of components;
the procedure and conditions for the presentation and acceptance of products by the authorities technical control manufacturer;
test methods and means;
methods of packaging and packaging material, a list of documents included in the packaging;
transportation (modes of transport and vehicle, transportation parameters);
storage conditions;
operating conditions;
warranty periods.

A clear understanding of the requirements for packaging of a particular product allows you to pack the product in the most rational way and preserve its original properties. Experts will quickly develop , and packaging will be of high quality and safe.

Technical specifications for computers.

They are designed for one or more products. (TS) define the requirements for the product established by the developer. In accordance with the standard GOST R 2.114-95 " one system design documentation "specifications sequentially include the following sections:

introductory part;
technical requirements;
safety requirements;
environmental protection requirements;
acceptance rules;
control methods;
transportation and storage;
operating instructions;
manufacturer's warranty.

When putting into circulation any product, the manufacturer or supplier must be guided by GOST TU for products. In the event that the production of computers is carried out according to standards different from the requirements of GOST or the necessary GOST standards are not defined, on computers this kind. Specifications should not contradict the requirements of GOST for this product. If the products are manufactured according to the TU, the presence of this document will be necessary for registration - it is on the basis of the data from the technical conditions that the Rospotrebnadzor bodies decide to issue a FEZ. Also on computers will be required to obtain GOST R for these products. The development of technical specifications by a technical specialist of the applicant's organization, as well as their development, many companies entrust to third-party specialists specialized organization... For example, many services are ready to provide assistance in development. By entrusting the development of technical specifications to specialists, the applicant organization significantly reduces time costs and is guaranteed to receive professionally drawn up documentation.

Calculate the cost of the document you need right now

The development of technical specifications is allowed by organizations on an independent basis. Preliminary tests and checks of products are carried out, conclusions of compliance with prescribed standards are drawn up, a description of the results obtained in the process of practical testing, what equipment and technology were used.

In total, the following TU categories are distinguished:

General, assigned for categories of goods of the same type
Specialized. The reference point is a certain substance, material or product can be used
Manufacturing for a specific part of the product.

It is an organizational standard that supports the implementation of state policy in the field of standardization setting. In addition, Federal Law 162 stipulates not only improving the quality characteristics of products, but also creating optimal conditions for competition.

Among the main functions are the following aspects:

Determination of the main aspects in the field of production
Fixation of a certain standard in accordance with the established parameters and standardization rules at the state level
Getting identical results
The ability to organize the protection of their own interests in the process of litigation.

Why is it necessary to produce technical specifications

TU (technical specifications for products) have all the necessary information that distinguishes a service or product from the original data. By examining the documentation, the buyer or seller can make optimal choice to the side best offer by product or service.

The obligations of the manufacturer or the seller are to comply with the established standards: openness of development, complexity and consistency. To fulfill such conditions, state and technical regulations help to accomplish the task.

The development of that for products involves a list of regulatory documents, legal aspects, storage rules, operation safety control. It is important to take into account that violation of the established standardization is punishable by administrative or criminal liability. Implementation control is carried out by Rosstandart.

Basic requirements for technical conditions

There are a number of conditions that must be considered to ensure that the development of the product specification is not subject to further revisions or rewrites. So, for example, there is GOST 51740-2016, which publishes the rules for the production of food products and the procedure for registration. As a rule, if there is no developed GOST, TU is mandatory for development. The first regulatory document contains the basic requirements that must be met by the technical specifications.

The development of technical specifications should contain the following information:

Scope in which the document will be used
Rules by which all standards must be met
Labeling instructions and proper packaging
How is control carried out
Storage rules
Delivery to the destination.

GOST provides extensive information on how the technical condition should look and its information content. In order to protect the interests of legal entities and consumers, multiple interpretations of the document are not allowed. It should have clear formulations, definitions of basic concepts. For a visual display of all items, it is recommended to use tables and lists.

TU for products according to GOST must have a certain design. It is recommended to use numbering by means of technical tools, a specific font, a field.

Registration procedure

To date, you can get comprehensive information about the technical conditions by contacting "Production of Russia". This base supported on the basis of FSUE Standartinform. All information is provided by manufacturers, as well as prepared catalog sheets - KLP.

If it is necessary to correct the information, the manufacturer must submit an application to Rosstandart. Filling in the KLP is a prerequisite. The registration process can be divided into several periods:

Preparation of the required forms
Collection of documents according to the list
Sending an application for registration
Service payment.

In the end, it remains only to receive catalog sheets with a special TU stamp. In accordance with the information declared by Standardinform, general order regulates production of no more than 10 days. There is an urgent production service for a fee - 1 day. To do this, all documents can be scanned and sent to e-mail... As a rule, you need to pay for an informational consultation, as well as assistance in filling out catalog sheets.

Development of technical conditions (TU)

By contacting our company, the customer will be able to save their own time, as well as avoid mistakes, the alteration of which will require additional funds. Our specialists will quickly complete the writing of technical specifications for a democratic cost.

The products that are manufactured at the production facilities of the enterprise and the operations that are performed for their manufacture must comply with industry standards. Products are subject to certain requirements regarding characteristics, packaging, labeling and human safety. All requirements are governed by GOST. At each enterprise, technical conditions must be observed, including methods of control, rules for acceptance, as well as storage, transportation, use and warranty service. Also, the regulatory document may describe the procedures through which it will be possible to determine the compliance of products with established standards.

Control methods

Tu includes different sections. These include a block where control methods are described in detail.

This includes:

Methods by which the ability to establish the characteristics and features of products;
The rules in accordance with which the sampling, as well as samples, materials and equipment for production process.
Technology for preparation and implementation of analyzes, measurements and tests;
Methods for processing the data obtained during the research;
The technical conditions include standards for labor safety and work with technical means.

Development of technical conditions

GOST 2.114-95 describes the basic requirements for the preparation of a regulatory document. It should be remembered that the requirements should be reviewed at least once a year. Here you will find ready-made specifications that can be obtained on very attractive terms. This is due to the fact that now technical means are actively developing and are regularly upgraded. All significant changes must be reflected in the specification. GOST is also being updated, which must not be forgotten to track. The development of technical conditions should be carried out by qualified specialists who take into account all the requirements when drawing up the documentation. It's complicated and laborious processwho needs certain knowledge and experience.

The technical specifications can be updated by the enterprise itself, or you can turn to third-party companies that specialize in this for help. The project is subject to mandatory approval, and all identified shortcomings must be eliminated in a short time.

Ready TU

Here you will be able to download technical specifications and receive them to your mail, which will save a lot of time. You will receive a certificate that will be created based on all the features of your company.

The development of technical documentation is required for absolutely any product, it can be both equipment and consumer goods.

Technical documentation may include:

assembly drawings,
technical projects.

This list of design and technological documentation complete and valid in accordance with the law. Some organizations have technical specialists on their staff who can independently cope with the development of technical documentation, and some enterprises may not have enough time or a specialist, so it is wise to develop technical documentation is possible with the help of our company's technical specialists.

Development of Specifications

The first document in the manufacture of products in Russia is the Technical Conditions or Organization Standard (STO).

Technical conditions (TU) is a regulatory document that establishes requirements for products. The document is developed by the manufacturer at specific species products. It prescribes all the standards for the compliance of which the products should be examined, after which you can issue a certificate of conformity or a declaration.

Specifications are developed in accordance with GOST 2.114-95.

The document should contain the following structure:

Assigning a Specification Number

Each technical condition has its own individual and unique number. To assign a number, it is necessary to determine the product code in accordance with the all-Russian classifier of products by type economic activity... In addition to this, you will need the number that was assigned during registration legal entity manufacturer in section the all-Russian classifier enterprises and organizations (OKPO code).

The specification number is created from four groups, separated by hyphens in the following order:

OKPD2 code → the serial number of the created technical specifications for production, for example 001 → OKPO code → year of implementation

For instance:
Technical conditions for the products "Distribution boards for residential buildings" have a number: TU 27.12.31-001-0132632125-2018

1st group - these are the first six digits of the OKPD2 product code (12/27/31)
2nd group - this is the serial number of the TU assigned to the enterprise (001);
Group 3 - this is the manufacturer's OKPO code (0132632125);
4 group - the year the document was put into effect (2018).

Examples of our work are given below.

The term of validity of the technical conditions is not limited. The development procedure is considered the simplest task for an experienced technician and takes only a few working days. To start developing technical specifications, you will need a technical description of the product and the manufacturer's details. The development cost depends on the complexity of the equipment or device, on the volume of work and can range from 3000 to 14000 rubles.

We advise you free of charge on the method of communication convenient for you!

- this is a document that the manufacturer will need when completing the kit permits... The purpose of developing a technical specification is to regulate the production process; the technical conditions contain information on quality control of raw materials, the main characteristics of the finished product. Besides, product specifications inform the consumer about the safety of the product, about its compliance with the standards applicable to industrial premises, packaging, labeling, etc. Complete with the technical specifications of the product must be a technological instruction and a technical description.

Development of technical specifications for products

In accordance with the "Law on technical regulation", technical specifications are not considered mandatory documents... They can be developed at the initiative of the manufacturer or due to the requirement of the distributor. But for devices that are used in manufacturing increased danger, TU will have to be developed without fail. Also, this document needs to be drawn up by a company that manufactures products for which regulatory documentation has not yet been developed.

Development of those. conditionscan be produced by the specialists of the manufacturer. In addition, certification bodies provide this service. TUs are also sold by the original developer, and the customer can contact him and officially purchase this document.

When developing technical specifications, it is important to understand the requirements of regulatory acts - if the compiler admits contradictions with the current legislation, such a document will not have legal force.

Besides, technical conditions for productionmust be drawn up in accordance with GOST 2.114-95 - this standard for the design documentation contains several sections. These include:

Technical requirements;
Requirements for the preservation of the environment;
Product safety requirements;
Control of technological processes;
Rules for the acceptance of finished products;
Conditions of transportation and storage of products;
Detailed instruction manual;
Manufacturer's warranty.

This GOST applies to non-food products. When developing technical specifications for food products it is necessary to be guided by GOST 51740-2001.

Specifications for food products are developed according to the following scheme:

Detailed characteristics of the finished product;
Features of the raw materials used in the production;

A complete production cycle, including the reception, storage and processing of raw materials, the formulations used, the technology for manufacturing the final product:

Its packaging and labeling:
Acceptance of manufactured products;
Quality control methods;
Conditions of carriage;
Storage conditions and terms;
Nutritional and energy value of the product;
Safety requirements at work;
Occupational safety and health;
Compliance with sanitary and hygienic requirements.

Coordination and registration of technical specifications

After the specifications have been developed, they can be agreed with the acceptance committee. Each of the members of the commission should be able to familiarize themselves with the TU and analyze the document. After the certificate of acceptance of the test sample of the product is signed by all members of the commission, it is considered that the technical conditions have been approved.

This is the order of approval of technical specifications at the manufacturer's production. If the customer applies for the development of technical specifications to the certification center, there is no need for agreement.

The last stage in the development of technical specifications is their registration. Until the moment the technical specifications are entered into the state register, this document has no legal force.

When registering technical conditions on the title and catalog sheet of the document, marks and seals of the body that conducts the registration are put. Only organizations that have received accreditation from Rosstandart have this right.

Types of technical specifications for food products

At the moment, Rosstandart registers two types of technical specifications - general and special. General specifications are developed for a group of products. For example, production cables, industrial batteries, block panels, etc. If it is necessary to develop technical specifications for a specific substance, material or device, it is necessary to formulate special technical conditions.

In this document, it is necessary to give a detailed justification why the decision was made to develop special technical specifications, to confirm the uniqueness of the characteristics of the object. For example, the development of special technical specifications is indispensable when carrying out work on the reconstruction of historical monuments, during the construction of unique objects, etc.

Calculate the cost of the document right now

If you need to order a certificate

You can contact our company. Qualified experts and specialists will advise on the certification process, select a more suitable design scheme, which will save you time and money