TV Prefix SML 482 HD instruction. Prefix "Rostelecom": Connection, Setup, Instructions. Where you can download the firmware and how to use it

Began to be actively used relatively recently. Initially, many people started with the connection of IPTV some companies, the most acceptable of which could be called except "Beeline". After many of these companies reorganized and turned into part of Rostelecom, a full reboot of the entire service was carried out, in particular, many new specialists were invited, acquired the SmartLabs platform, and also developed softwarehaving a single interface for all currently applied models of IPTV format consoles. In other words, in order to launch really high-quality consoles "Rostelecom", they spent quite serious work, although the adjustment of the service to the ideal state was not stopped to date.

At the moment, the company makes a big bet to develop the service digital televisionAnd at the same time, almost all means trying to fight for ensuring that new users constantly connected. That is why the prefixes of Rostelecom are becoming more common. People try to learn as much as possible about the main features of the service from this company.

SML-482 HD

Technically, such devices can be called the most modern and advanced among all that Rostelecom uses. The most powerful processor, the maximum amount of RAM and a fairly compact case - here are the main advantages of SML-482 HD, which allocate the device among the others. No special problems in the process of using this console, users were not detected, and with various faults or marriage they are returned extremely rarely. It is worth noting that with the release of this SML-482 HD, the company began to gradually introduce support for supporting 3D television and other more modern services.

SML-282 HD BASE

This prefix is \u200b\u200bpractically no different from the SML-292 Premium model, and the differences between them are rather minor. Externally, they are approximately the same - a premium model, which is provided by digital TV, there are two USB connectors against one in the standard, it is worth noting that it represents a slightly more powerful iron and is characterized by the support of USB-Wi-Fi-modules. A good prefix having excellent hardware potential. There is no information that these prefixes "Rostelecom" are distinguished by frequent marriage or insufficient assembly quality.

Infomir Mag-250

A sufficiently long-time prefix of this model is widespread. It is worth noting that many people have connected digital TV from those companies that later joined Rostelecom, but at the same time they have already established such consoles. If we consider the device from a hardware point of view, then it is definitely not yet exhausted, and the only complaint that has not been corrected to today, you can call a relatively weak fastening of the power connector, as well as the connector through which the cable is connected by the TV. In this regard, quite often this TV prefix with many users simply returns back, since subscribers can randomly break the connector from the attachment.

One of the most significant software features of this device is that it can be used with the help of a standard firmware from "info", after which it is used as a standard media player with the ability to boot the playlist and view any channels of digital television without any restrictions. It is worth noting that the delivery initially this equipment It was carried out only with the software and a remote control from the Info, but over the time of the TV console, the MAG-250 began to be supplied with the Rostelecom's branded panel.

Infomir Mag-200

This model began to spread quite widely during Rostelecom's lifting and distribution of digital television throughout the country, but it should be noted that the model itself is already morally outdated, so the subscribers described devices are practically not issued by subscribers. At the same time, the television prefix can also be used to date, especially, cycling the native firmware from the "info", it allows you to watch any channels of modern digital TV without any restrictions with a pre-loaded playlist. Supply of such equipment was carried out exclusively with the signature console of the info company, as well as the factory firmware. Further migration on the SmartLabs platform was made separately.

IPTV RT STB HD

If you recall the Infomir MAG-250 device, then it can almost immediately see absolutely identical characteristics with those that this prefix "Rostelecom" offers. Instructions, software and remote control used from SmartLabs, while recently began to begin to appear quite interesting feature This equipment - when interacting with certain models of routers from Rostelecom, the device works at least strange. In connection with this, first the prefix must be pre-stitched, and only then is already connected to the device. Otherwise, the router constantly begins to disappear Ethernet-link on the port to which this device is connected. It should be noted that, for example, the standard Sagemcom router does not differ at all with such a problem, while the Model Rev.1 already manifests itself from the best side.

IPTV HD 101.

This is the first prefix "Rostelecom" 2.0, which began to be supplied in a branded box with headphones. The set of this device includes an HDMI cable, but at the same time users often note that it works far from always correctly and appropriate. If we consider the hardware characteristics of this equipment, then they are practically identical to the MAG-250 model, as there is an absolutely the same processor here, but it has almost two times more RAM.

Consoles can be attributed to medium group In quality, and periodically in service centers they are delivered with various nutritional problems. It is also worth noting that there are no internal portal in them, as a result of which the company has almost immediately moved to connecting the "Rostelecom" console model IPTV HD 103, which has not only a standard version of the configuration, but also an additional option Wi-Fi and Mini.

Yuxing YX-6916A

Chinese production model. These consoles can be called first of its kind, which were supplied with the presence of an additional HDMI cable in a set, and they were used even when Rostelecom did not acquire most of the companies in this area. It is worth noting the fact that the quality of such equipment is quite high, which is significantly evidenced by the almost complete lack of refunds of such devices with marriage, and at the same time they work for several years without any complaints or complaints from users.

The only problem of these devices can be called the transition to software from SmartLabs, since because of this, it was necessary to carry out full refreshing of devices manually. Another famous trouble is to view video using a USB connector, since there are a number of codecs that do not support this prefix "Rostelecom". Standard for it with such a lack - no sound when trying to view.

Motorolla VIP1003.

This model comes in small quantities. Over time, the company decided that this interactive prefix "Rostelecom" will not be used, so it is currently provided to users exclusively from old stocks. It should be noted that consumers almost never respond badly about the operation of this equipment - it functions clearly and without any problems.

Standard connection option

In most cases, the connection of the console is carried out through the Ethernet cable, which the installer socks through the apartment to the TV from the router. The only disadvantage of such a scheme is that the LAN cable will need to hide somewhere, since otherwise people staying in this room will regularly stumbling on it, but at the same time digital prefix "Rostelecom" connects much more reliable compared to the rest of the methods, and is also not so sensitive to all sorts of electromagnetic interference with the device.

Connection via Wi-Fi

Here several different options can be used here.

The first provides for the involvement of specialized wireless media models Motorolla 2400, which supplies Rostelecom himself. Prefix, the password to which can be found on its box, is connected without wires, which significantly simplifies operation and makes the application of the device more convenient.

The main advantage here can be called that to ensure the transfer of a multicast using such a mediamide uses a range of 5 GHz, which today is practically no applied. It is also worth noting that this model of the equipment provides the transfer of information to a large enough, by the standards of Wi-Fi, distances. At the same time there are some disadvantages.

The first minus is a considerable cost, which is approximately five thousand rubles per set of two devices. The second minus, users call what the equipment is not so easy to configure, because you need to perform a sufficiently large number of actions to ensure the adaptation of two adapters.

Alternatively, such a device can be used cheaper analogues that are manufactured under TP-Link brands and D-Link, which will save a total of up to one and a half thousand rubles.

The second version of the connection is the use of a standard Wi-Fi-Fi-Module of the router, as well as an adapter from the side of the console. The main complexity here is that the router must have the function of logical separation of LAN ports from Wi-Fi. In addition, it will be necessary to try to choose such a model of the adapter with which the HD-prefix "Rostelecom" you have been able to interact normally. Although here you can go for some trick, and instead of a standard USB adapter, use a specialized access point capable of working in Wi-Fi client mode.

How to do it?

After you finish with all the settings of the router used, you can start connecting to your console. To begin with, connect your console and router using a special patchcord. If you specified the port in advance to be used as a bridge, then in this case you will need to connect the cable to it.

Also connect the TV with the HDMI port on the console. If you have already tried to connect through any other interfaces, then in this case you will need to additionally configure and the TV itself to switch it to the use of HDMI. Ultimately, simply connect the device to the power supply, then activate it.

A login window will be displayed on the TV screen. After that, you need to specify the username and the key that the provider itself provides the provider in the contract. If you forgot this information, you can always find a copy of the contract, to view information in personal Cabinet Or clarify them with a technical support operator.

After entering all personal data, you can use the IPI-TV service. It should be noted that some special configuration of your console purchased to ensure normal operation of this service is not required. It is noteworthy that you almost immediately appear to use special System Parental control, integrating all sorts of social networking services, adding a variety of weather widgets and a number of other interesting "chips".

Connecting through an electrical network with POWERLINE PLC adapters

Such adapters allow the user to block a full-fledged local network via electric. The cost of the pair of devices in the kit will be approximately two and a half or three thousand rubles. The main advantage of using such an option is that the reliability of data transfer is ensured, comparable with the quality of the cable connection. The disadvantage of such execution is called that when there are strong voltage jumps in the power grid, the adapters simply can burn out, and as a result, the risk of burnout LAN-port on the router or the console used is already increasing.

Is it possible to connect IPTV without a console?

Indeed, at the moment such an opportunity is envisaged. Recently, Rostelecom began to actively promote a new service, which provides for the design of the subscription at once to several TV channel packages, and also allows you to view digital television directly through a laptop, computer, smartphone or tablet.

It is also worth noting that the Zabava application is actively implemented by the company as pre-installed on many TVs from LG, and in the near future it is already planned to additionally embed it to equipment from Philips and Samsung manufacturers. However, you need to correctly understand that you will not be able to connect the digital TV services if the TV prefix is \u200b\u200bnot rented, because the activation passport of this service provides for a mandatory provision of a subscriber of such a rental or full ransom.

Is it possible to watch video from the flash drive through the prefix?

For a long time, the user files contained on the flash drive, it was customary to save in the cloud, while each subscriber had the opportunity to place files of up to 7 GB or expand it to 30 GB for a certain amount. Ultimately, the company collided with such a problem that after loading the video required its additional processing, to then transfer it to the subscriber's screen. At the same time, transcoders could not cope with such a load, as a result of which the video was processed over several months. For this reason, the service quickly lost its popularity, many negative reviews appeared about it. That is why, starting from 2013, the consoles allow you to view video files directly from USB drives without any problems.

Today, all consoles can play video from USB drives, but there are some restrictions on the video and audio codecs used. So if you encountered such a problem that you do not have a sound when you try to play the film, you can simply try to overcertrine it in some other codec.

How else is it allowed to use such consoles?

Such a question is quite often asked by those subscribers who have already disconnected from the Rostelecom services, but at the same time bought the console and do not understand how it can be used with benefit. Actually apply it somewhere else hardly it will succeed, and the only exception can be called except that the devices from the company "InfoMir", as well as RT HD Standart, which, if you wish, without any work, reflash using standard software to subsequently It was used as a standard media player.

It should also be noted that some SML-282 and SML-482 models come across, which have the MTS logo, and, it is likely to use such consoles as devices from this operator, while the rest of the models will remain in any case. You have a dead cargo.

Where can I download the firmware and how to use it?

The prefixes from Rostelecom are configured in such a way that after connecting to the provider's network, it happened automatic download and setting the SMARTLABS special firmware. At the same time, it is not possible to download this firmware on the subscribers to the subscribers, and even if you have it in your hands, it is unlikely to get it onto the device forces.

In order for your TV prefix with Wi-Fi to receive the necessary firmware, you just need to restart it. When you again turn on the device will automatically check the new available software versions, and if there are such, the automatic update procedure will be activated. That is why if you have any problems in the process of operation of such equipment, first try it simply to restart it, since in many cases the standard firmware update to a newer version is required.

How to use a hard drive?

At a sufficiently large number of models of the prefixes of the prefix, it is possible to use the HDD hard disk, but many users do not know how it can be used. First of all, it is worth noting the fact that only 2.5 form disks can be installed in the devices, but even if you put them in the prefix, many of them do not really know how to work, since the transfer entry is automatically sent to the cloud, and Playing the console files are capable exclusively from USB drives.

MAC-address

To learn the MAC-address of your console, just look at the sticker located in the bottom panel of the device from Rostelecom. Prefix 2.0 also often has a sticker with a serial number and this address on the box. Another option: After the operator's menu is loaded, you can go to the "Settings" item and go to the System Information section.

Thus, you can independently connect and configure purchased equipment without resorting to any help from qualified specialists. Often, the configuration and connection procedure does not cause any difficulties, and you can additionally be completed with the instruction that is attached to each model of consoles or routers.

If you fail to deal with this problem yourself, then you can already contact the specialists of Rostelecom. In the predominant majority of cases, service centers are present in almost every large cityand at the same time give the opportunity to order subscribers paid services Connecting such devices. Among other things, there is a lot of private masters performing similar works.

Now you do not have to break your head that gave a grandmother that lives in the village. In two minutes, its old Elteshnik can easily be turned into a shattered SmartTV with a bunch of channels, a filmk, the archive of television shows and karaoke. Need only an Internet and ...

... Black box "Interactive TV 2.0" from "Rostelecom"!

The new TV prefix allows you to view more than 120 digital and HD channels, more than 2,000 films and TV shows, manage watching (pause, rewind, archive), duplicate free image from a TV to tablets and computers (Multiscrection function), view 3D movies, sing in Karaoke, establish parental control, enjoy interactive services, watch photos and videos from a flash drive. And all this at a price of 320 p. per month. But even if you do not pay, then you will still be available about 20 federal news and entertainment channels. This is besides all of the listed.

The main chip of this new boxed product is that you do not need at all .... Internet from Rostelecom! The box clings to the Internet of any provider, even mobile. The main thing is that the speed is not lower than 0.9 Mbps. And it is not necessary to go for the device in Rostelecom - it is sold in "connected", and in Euroset. The price is 3990 rubles, but by the action, which will last until December 31, the prefix can be survived for the 1990 p!

Another cool chip of a new device is the presence of a built-in Wi-Fi, a module that will save you from excess wires - the prefix is \u200b\u200bperfectly connected to the Wi-Fi-router by "air" at any speed. The box will be useful not only to grandmother in the village, but also travelers who will suddenly launch through Russian television channels in distant enemy countries. Not to mention traveling - for them this device is generally a real find! Connect to any TV in a crucible hotel andrs to yourself for yourself due to the hotel Waifa.

In the rich package, everything you need for an independent connection is included. Even the kettle will figure out.
Actually, this is:

• IPTV herself stb-prefix SmartLabs SML-482 HD Base With a Wi-Fi module, branded for Rostelecom (BCM7230 750MHz Dual-Core chipset, RAM DDR3 512 MB, Flash Nand 256 MB).


• Power adapter 220 V.


• A steep remote in the form of a company "Rostelecom" ear, which can be programmed under any TV to manage them also telecom.


• HDMI cable.


• "Tulips".


• Ethetnet cable.


• Adapter with tulips on SCART.


• Even the batteries for the console did not forget.


• Instructions and filled guarantees with seals.

At the hardware level, the following codecs are supported: Audio codec - MPEG1 / 2, MP3, AAC, AC3, WMA, video encoding - MPEG-2, MPEG-4 Part 2, H.263, H.264 / MPEG-4 AVC, VC-1 .

Interfaces Consoles:

• 12V food,


• audio / video output for "tulips",


• HDMI-connector 1.4A C HDCP,


• Ethernet 10 / 100Mbit Base T,


• USB 2.0 for connecting Flash carriers and wireless keyboard (!).

The connection process and settings are very simple and intuitive. You need to turn on the device into the socket, connect the HDMI cable (or "tulips") with a TV, insert into the battery panel and press the "Power" button. The prefix turns on and offers to connect to the Internet via Wi-Fi if you did not connect it to this Ethernet cable.

Here there may be difficulties if there is no hand-made keyboard, and this is the main "cant" of the console. As blindly entering the password with the buttons from the console, I did not understand - the scheme with several pressing buttons with letters does not work, not to mention the characters and the upper case. But the keyboard via a USB radio module is connected to a bang!

After the prefix sees the Internet, it will update its software itself.

The process is quite long, I have the first inclusion occupied about 10 minutes - the prefix 4 rebooted.

Finally, the shell also loaded and the prefix reported a 30-day promotion, when you can watch 120 channels included in the starting package.

This is how the main menu looks like, in which you can choose or some TV channel or a film.

Unfortunately, I did not find free movies - everyone can be aware of them for money, or purchase a collection. Viewing one film costs about 50 rubles.

Rostelecom is rather rich in the "Rostelecom" - it has about 2,000 films. There are 3D and HD.

Choosing a TV channel, you can either watch the transmission from the current position, or from the very beginning, in the record - it is very convenient if I missed the beginning.

Of course, the owners of SmartTV this prefix will be useless - all the functions described and even more are already laid on the TV itself. However, if you have a regular TV, or several of them in the house, then this is a very interesting solution. In addition, in addition to the "Rostelecom" such a service from Russian providers no one else suggests.

Useful thing and ftopku?

To access IPTV offer, as well as other additional optionsThe prefix is \u200b\u200bneeded in stock Rostelecom SML 482. Thanks to it, it is possible to view interactive television. Equipment itself can easily cope with FullHD quality. The viewer gets high level Comfort, as there will be completely absent distortion and buggy pictures.

Features Media Player

Rostelecom SML 482 HD Base prefix has a compact size, with a width of 100 mm (similar and depth), as well as height - 32 mm. The housing is made of black plastic with a matte coating. There are minor transparent inserts.

Inside the media player is endowed with a fairly powerful processor, in which 2 kernels lie 2, each has 750 MHz. Their performance is just enough to demonstrate high quality broadcast. RAM It is 512 MB, which is sufficient to implement in the practice of the entire functional thereof.

Due to the presence of such parameters, smooth animation is always supported, as well as interact when applying a graphical interface on FullHD quality video.

Opportunities

Rostelecom SML 482 HD Base in the program part has an Open GL technology, on the basis of which a graphic application with high resource consumption is created for more than one year, such as games. They easily cope with the colorful interface. The main difference is to interact with 3D components. Due to this quality, the media center competes with the Play Station or Xbox leaders.

The maximum screen resolution is 1080p, and the frame update limit is 60 per second. This leads not only to a clear, but also a smooth image on the screen. Even if the Internet connection is rebooted, the quality will be adjusted in dynamics due to a special software superstructure. Consequently, IPTV will still work further and fully.

The prefix can support other applications that opens up some additional features. It is possible to consider the recognition of the weather, opening calendars, games, social achering programs and much more.

Software

The SML 482 model has a special software where almost all settings and options from the provider are supported. It is only worth mentioning about the deferred TV program. It will be possible to watch it within 48 hours after graduation. Periodically, you can recording content. The console can become an online player due to the video function on request. In addition to the classics of the genre in the archive and innovations of the film industry are presented.

A special feature is also considered to receive information about each player participating in a football or other sports orientation event, as well as film actors. Also as settings protrud social networks.

Unpacking and installation

Acquisition of this device will suit those users who have a TV with a wide screen resolution, even if there is no Smart TV. This will fully replace classic and boring television. After buying a kit, you should unpack and check all the contents. This includes:

• Power Supply.
• HDMI cable.
• AAA batteries.
• Coupon for warranty.
• User's manual.

Two cords are needed that the client himself chose the most suitable option for himself. It should be noted that most of the devices are not capable of maintaining a wireless Wi-Fi connection. The Ethernet connector is used to connect, located from the rear. In addition, this part arranges:

1. Power connector.
2. Audio output.
3. AV, which is necessary to connect a composite adapter.

Alternatively, the LAN cable so as not to lay it all over the apartment, you can buy by which the transmission of the signal is carried out through the power grid.

Many space for installing the console will not be required due to compact dimensions. But in the process of work, it highlights a certain level of heat. This indicates the need to leaving space to items at 30 cm. Thus, the required level of heat exchange will be achieved. It should be eliminated as a place of installation, places with direct getting of sun rays.

What is needed for work?

After inserting the batteries into the remote remote control Press the power button. Initially, communication with the provider server will be made, which is caused by checking the availability of new firmware. Next, you need to enter a login with a password for authorization on the resource. All data will be available when concluding a contract for the provision of communication services. On the map, pre-erase the protective coating and enter all the data on the screen field. Any additional parameters do not have to do.

Many users digital interactive television Rostelecom using TV consoles Rostelecom IPTV. STB RT-HD Standart, know that this prefix - copy of TV consoles MAG-250 Micro from inform BUT MAG-250 - This is a full-fledged homemade media center, with a bunch of buns,

How to flash the console Rostelecom IPTV STB RT HD into the MAG-250 infomir.

Procedure firmware consoles Rostelecom IPTV STB RT HD in InfoMir MAG-250 Non-flat, but there are several pitfalls, which I think I need to immediately say:

1. Before firmware Prefix STB RT HD You will need to find playlist channel Rostelecom for your branch Rostelecom. For example, here - Rostelecom playlists. Otherwise you will not be able to watch rostelecom digital television.

2. If you have remote Rostelecom, so:

You need iPTV STB RT HD modified firmwareSince this remote will not work with standard firmware from the infomyir, since there are no some buttons on it.

3. If you want the Internet and digital television on rostelecom IPTV STB RT-HD console At the same time, in most cases you do not get it in mind the technical implementation of the connection. Such an opportunity is on routers who can Udp-to-http proxy.

4. You will not be able to use interactive services rostelecom digital television because They are available only on firmware Rostelecom.

Firmware for TV console Rostelecom IPTV STB RT HD

Standard firmware for MAG-250 (Normal Remote) - Link. Modified firmware for MAG-250 (Rostelecom Putlet) - Link.

Reset TV set-top boxes Rostelecom IPTV STB RT HD to factory.

Before changing firmware Prefix STB RT HD with Rostelecom on the Info It is advisable to reset the setup settings to the factory. To do this, turn on the prefix and press the button. Menu. On the remote Opens BIOS consoles STB RT HD:

Select item DEF. Settings and press the right button (\u003e

Press the button to the right (\u003e). This message should appear:

Press the button OK And wait for reboot creaves Rostelecom STB RT HD.

Firmware TV consoles Rostelecom IPTV STB RT HD:

1. Download mag250 firmware files — Bootstrap and imageUpdate. and put them on placing them in one folder - let it be a folder mAG250. on a C: \\ disk. There you must also put the McAST.exe file and DualServer.

1. Turn on TV console IPTV STB RT-HD Standart, Press and keep the button down Menu. On the control panel.

2. Find B. BIOS consoles STB RT-HD:

Select section Upgrade Tools..

3. Connect the computer to the console using a network LAN cable. Cable crimping is the usual, straight.

4. On the network card of your computer, write the IP address 192.168.1.1 and mask 255.255.255.0 .

5. Run the program dualserver.exe.. To do this, you need to run the command line ( Win + R. And you line Open Enter cmd.Press OK).

6. In the Windows command prompt We write a team C: \\ MAG250 \\ DualServer -V . The server must start and operate. We fold (and not close) the command line window.

7. We launch the program mcast.exe. Double mouse click. She ask to choose a network interface through which we will iptv STB RT-HD :

Choose 192.168.1.1, Local Connection. Press the button SELECT. The following window opens:

Here you need to change the address of the transmission of the first stream ( Stream 1.) to the one that listens STB RT-HD — 224.50.0.70:9000 . The address of the second stream ( Stream 2.) We do not change. Press both buttons Start..

7. B. console MAG-250 It is necessary to choose Mc Upgrade. and click\u003e (Right):

Thereafter rostelecom prefix STB RT-HD should reboot with new firmware .

Attention! Operate via USB with Rostelecom STB RT-HD on MAG-250most likely it will not work - you will be constantly issued a mistake File Mag250 / ImageUpdate Not Present, even despite the fact that the file in the folder lies, the flash drive is formatted in FAT32 and its size is not more than 8GB. therefore firm Rostelecom STB RT-HD through a multicast.