Large balloons with a logo. Where to order cheap logo printing on balloons? Balloon logo printing price

The production of balloons and filler, which can be helium, is quite common, but requires a lot of investment. Also, equipment for making balls will cost about 500 thousand rubles. In this area, very high level competition, so the business can be called unprofitable. But there are other types of products that are gaining popularity every year.

  • Benefits
  • Purchase of raw materials for balls
  • Glowing balloons production technology
  • Sales markets
  • How much money do you need to start making?
  • Step-by-step plan for starting a business
  • How much can you earn
  • How to choose equipment
  • What OKVED must be specified for the manufacture of glowing balloons
  • What documents are needed to open
  • What taxation system to choose for the manufacture of glowing balloons

The production of balls has recently been in great demand, as they are used to decorate the premises prepared for events, they are presented for birthdays and simply bought as a souvenir. But more attention is attracted by the glowing balls. They sparkle due to the LEDs located inside the product itself. These unusual balls can serve as decorations or props for a show.

The article will discuss the manufacture of glowing balloons.

Benefits

This business has its advantages:

  • At the initial stage, it is not necessary to rent premises for production, you can make balloons at home. Equipment and materials do not take up much space.
  • You can also minimize labor costs. To do this, you do not need to hire personnel, because you can make small batches of goods yourself. Additional staff will be required only after production begins to expand.
  • You can make approximately 200 balloons per hour. This is a very high performance.
  • The manufacturing technology is rather simple, so even an inexperienced person will have no difficulty in understanding it.
  • Raw materials are inexpensive, which influences the formation of a low cost price. At the same time, the selling price for one product is much higher than the costs associated with its creation.
  • You can combine other activities with making balloons that glow. This can act as an additional income to the main income.

Purchase of raw materials for balls

Consumables for making balls are inexpensive. What you need to purchase:

  • balloons;
  • lEDs in the form of bulbs;
  • batteries (tablets);
  • scotch tape or duct tape.

When choosing balls, pay attention to the material from which they are made. The most suitable is dense latex.

Glowing balloons production technology

Making glowing balloons takes place in two stages, which are quite simple to perform. Basic steps:

  1. Installing flashlights... The balls are fitted with LEDs, inside of which batteries are already inserted. The lamp is a capsule that allows the flashlight to remain safe inside the ball. Batteries last from 5 hours to two days.
  2. Treatment... If you want the balloons to stay inflated longer, then apply a special composition to them (on the inside). Accordingly, the price for such products will be higher.
  3. Inflating balloons... This stage is carried out using air or helium cylinders. But before starting the process, you need to remove the sticker from the ball. The diameter of the inflated product can reach 30 cm.
  4. Decoration... Depending on who you are selling the product to, you can decorate finished products paints.

Sales markets

You can sell your products to holiday agencies, restaurants, cafes, private clients, wedding organizers, animators, organizers of children's events. Also, an entrepreneur can open an online store where he will sell finished products.

How much money do you need to start making?

To start a business, 10 thousand rubles will be enough. The final amount depends on the LEDs. They differ in form, type of work. Some burn for a long time, while others go out and light up again.

You can purchase 500 balls at first. One costs about 5 rubles. And LEDs cost around 12 rubles apiece from wholesalers. One ball will cost an average of 25 rubles, and you can sell it twice as expensive. A 100% markup is quite appropriate in this business. But this situation applies to air balloons. The prime cost of helium balloons is much higher, and accordingly, the selling price will be about 150 rubles.

Step-by-step plan for starting a business

Market analysis and business plan preparation are the first steps that need to be taken to establish own production for making glowing balloons. To legalize a business, you will need to go through state registration... Immediately, when opening this production, you can do without a rental space, i.e. do all the work at home. You will need to purchase required material, as well as to establish distribution channels for finished products.

How much can you earn

If we talk about earnings, then it should be noted right away that the minimum mark-up for one ready-made glowing balloon is 100% or more. The total amount of profit will directly depend on the amount of goods sold. If 1000 items are sold per month, then the net profit will be at least 25,000 rubles.

How to choose equipment

To start making glowing balloons, no special or complex, especially expensive equipment is required. You will need to buy diodes and balloons (they must be made of dense latex so that they can hold the structure in them), button batteries and adhesive tape, you can use scotch tape. Inflated with air or helium.

What OKVED must be specified for the manufacture of glowing balloons

In a number of documents, primarily in those submitted for registration, it is necessary to indicate the OKVED code for the selected area of \u200b\u200bactivity. Code 47.19 is suitable for the production of glowing balloons, which includes other trade in non-specialized trade objects.

What documents are needed to open

To legalize the above-mentioned business area, it is enough to register as individual entrepreneur... To do this, an application is submitted to the registration authority established sample, a photocopy of the passport is made, a state fee is paid and a copy of the TIN is attached.

What taxation system to choose for the manufacture of glowing balloons

Simplified - the best option for this line of business. It allows a businessman to pay 15% tax on net profit... But here you will need to provide documents confirming the costs associated with manufacturing. If there are no such documents, then 6% income tax is paid.

Do I need permission to open
There is no need to obtain permits or additional licenses to make glowing balloons. The registration certificate is more complete for the named area of \u200b\u200bactivity.

The Sempertex company is the world leader in the production of high quality latex balloons.
Sempertex balloons have succeeded in gaining popularity among decorators and aerodesigners as they were specially designed for the balloon decorating professionals and connoisseurs. The privileged geographical position of Sempertex in the immediate vicinity of latex plantations opened up broad prospects and made it possible to enter the world market with the slogan: “Innovation in quality and color”.

CTI

CTI has been producing foil balloons since 1977.
Became the first company to mass-produce the product in the US market. CTI Industries is located in Barrington, near Chicago, Illinois. The CTI plant is one of the most advanced in the industry. Unlike other manufacturers, the CTI plant includes a full cycle of balloon production - from film production to finished products.

Betallic

The American company Betallic was founded in 1983 and since then has rightfully been one of the leading manufacturers of foil balloons in the world.
Betallic offers a huge range of balloons for any occasion, holiday or special theme, with an emphasis on original, contemporary creative concepts and designs by professional decorators. Betallic offers the largest selection of holographic film balls.

Flexmetal

The Spanish company Flexmetal, which produces foil balloons, was founded in 1987.
Flexmetal is one of the world's leading manufacturers of foil (milar) balloons. Balloons from the Flexmetal company are distinguished by excellent quality, novelty and originality of design solutions, make up a wide range and have almost unlimited possibilities in the design of holidays.

Hi-Float

Hi-Float was founded in 1983.
It was then that the United States developed chemical formula with the help of which the aqueous emulsion solution allowed to maximize the flight life of the latex balloon. Hi-Float is a liquid plastic solution that dries inside a balloon to form a helium-retaining film. An indispensable attribute in the work of a modern aerodesigner.

Zibi

The Swiss company Zibi has been producing equipment and accessories for working with balls since 1974.
Zibi compressors are deservedly popular among professional decorators in Russia. High quality and reasonable equipment prices are the key to the success of Zibi products.

Agura

Agura is the first and only manufacturer of foil balloons in Russia since 2005. The company's products are distinguished by their original attractive design and relevant meanings for a wide audience, for any festive events. The bold solutions and stylish design of Agura balloons are rapidly gaining popularity and creating new trends in aero design.
The company's factory is located in the Moscow region and is equipped with high-tech equipment with a production capacity of 1.3 million balls per month. A wide range of single-color and thematic foil balloons is available to customers, and the location of the manufacturer ensures the most prompt delivery to the Russian consumer.

Balloons have always been an attribute of the holiday and a guarantee of good mood. Even as a child, we watched with bated breath as one of the adults, drawing more air into his chest, tried to inflate a bright colored toy. A balloon is almost magic: it seems like a ball, but it flies slowly and does not hurry to fall to the ground - it descends slowly, slowly. And if such an air balloon is filled with helium and strives not down to the ground, but up to the clouds, then this is just a fairy tale.

How balls are made

How are these amazing toys made? Modern technologies make it possible to produce latex products of various colors and a wide variety of shapes, and if in Soviet times air balloons were only four colors (red, blue, green and yellow), now you can see balloons of the most incredible colors. In the old days, in order to decorate balloons, children made drawings on them with a ballpoint pen, and now it is possible to apply any drawings on them to order in a typographic way. Balloons today are not only toys for children, but also a marketing tool for promoting a company or product and one of the most popular ways to decorate festive interiors. Although even now, not a single child will refuse a bright flying balloon.

To make a balloon, you need latex. Latex is obtained from the sap of rubber trees that grow in Malaysia, Brazil and Mexico. When water is added to the latex, an aqueous solution of rubber is obtained, which is then placed in special baths and heated. Colored pigments, various synthetic or natural ingredients are added there and mixed. This is done to color the white latex mass. An important condition getting a good result is accurate proportioning.

At the next stage of manufacturing, they take special ceramic molds, or blanks, and cover them with a coagulant. This is necessary so that the surface of the molds can hold the latex solution. The molds are transported by means of a conveyor over the latex solution and lowered into it. The shape of the future product depends on the shape of the blank. After the form has taken over the latex solution, it is sent to the thermostat.

A thermostat is a large oven that reaches a temperature of 500 ° C. In a thermostat, products are dried for some time. After drying in a thermostat, the finished products are removed from the blanks using a stream of water. At the next stage, the balloons undergo finishing: they are sprinkled with an antiseptic, passed through cleaning filters, and checked for dryness and chemical resistance. Finally, manufacturers check finished products for compliance with technological standards, and then send them to retail.

Production of balls in the Print company

The production of balloons is a complex and very interesting process. Our company has its own factory for the production of balloons in Moscow, so we ourselves control the entire technological process and the quality of the materials used. Our state-of-the-art equipment allows us to make super products suitable for applying any designs to them, including logos and photographs. Our balloons are absolutely safe for use at work and at home, as they are made from proven, harmless materials. All our products are quality tested, so you can be sure that these wonderful bright balls will not burst during a holiday or presentation of your products, having an unexpected effect on guests.


Benefit logo printing on balloons in Moscow

Printing on balloons means inscriptions, photographs, drawings, numbers of different shapes and colors. Decorations with latex products are popular, as many consumers choose this method of decorating rooms and buildings more often. Balls are used by firms and ordinary people during the design of festive events, corporations, parties. Walking near the establishment where such balloons are distributed, each person reacts accordingly. Order one color or multicolor logo printing on balloons can be found in the online store "MF Search". On the pages of the company, in addition to the products, you can purchase sticks, clamps, braid, weights and so on.

Balloon logo printing price

Inflatable balls easily become flashy, memorable promotional promotions. Products are used as marketing elements, attracting the attention of the surrounding audience. Inflicted logo printing on balloons in two colors and more (three, four) - an excellent opportunity to use an advertising platform. Functionally, latex products are regarded as decoration, promotional items. They are applied to:
  • pictures of famous cartoons and fairy tales;
  • famous expressions, different icons and symbols;
  • advertising promotions;
  • congratulations on your birthday, anniversary;
  • love confession;
  • invitation to visit, etc.

The price of the finished product depends on the number of sides applied, printing colors and circulation.

Where to order cheap logo printing on balloons?

Logo printing on balloons in three, four colors or four to choose? Or make them solid?

Why choose products in the MF Search online store?

The company's website contains products designed to decorate and decorate any holiday. You can purchase:
  • carnival accessories (confetti, streamer, horns, glasses);
  • wedding decorations (ribbons, rose petals, locks);
  • disposable tableware for a holiday in nature;
  • everything for a children's party (soap bubbles, party toys, crackers).

The store provides customers various services, including multicolor and one-color printing on balloons.

02.02.2019 Berdnikova Evgeniya

The first time I made an order in the company "100 smiles", but definitely not the last, here are the most adequate prices for balloons with delivery! I wanted to prepare the salon for the opening to the maximum, to please every visitor on this day and who passes by, and balloons with a logo are just what you need, in my opinion, a balloon gives joy at any age! Thank you so much for making large balloons with a logo, it was nice to go home that day and see our balloons in the hands of passers-by, the opening was successful!

12/29/2018 Anna Prudnikova

I ordered 100 balloons here for a holiday in kindergarten for 3 groups, I myself was organizing a holiday for children, I was very worried, I wanted to please the children on this day, thanks to "100 smiles" - I did it! We were pleased with the timely delivery of the balls, and with the quality, for 3 days it was like the balls were hanging from the ceiling, and then for another 2 weeks the kids were happy. Thank you for your help in decorating the holiday, thanks to your balloons, it turned out to be more colorful and more fun!

06.11.2018 Melnikov Dmitry Vladimirovich

Thanks to the company "100 smiles" for our balloons with the logo, they did everything quickly, literally 2 days before the opening! It seemed to me that making 2500 balls in such a short time was unrealistic, but the guys proved the opposite. I was also very pleased with the price, in many places I found out about the cost of balloons with a logo, but here they gave me the lowest price, so I turned here on the basis of the results, which I never regretted. The quality of work in the company is at the highest level, as is the quality of the balls!

11.10.2018 Doronin Petr

I advise everyone to the company "100 smiles", decent, punctual guys who work conscientiously! They helped me with the decoration of the apartment for my wife's discharge from the hospital, I don't understand anything at all, but they even helped me with the choice of balls, everything turned out very beautifully, my wife already burst into tears when she went home. A stand with a bouquet with a foil balloon has been standing for a month, as soon as it was brought! I thank the company for their help and for the prompt delivery of balloons, I wanted to please my wife and I did it!

09/13/2018 Artem and Veronika Makarenko

We ordered from the company “100 smiles”, a figure from the balls “Bride and Groom”, we liked their work, and the prices too. The balls were supposed to be delivered by 9 am, and they even brought them at 8:45, punctuality is on top! We liked the figures very much, and all the guests too, beautifully decorated, the printing on the balloons is bright and of high quality. Everyone took pictures with them that day, sometimes it was even enviable that they paid more attention to them, and not to us, the real bride and groom. Now, if we need balloons, then we are just here!

08/16/2018 Ksenia Andreevna

Thanks to the guys from this company for decorating the store with balloons, it turned out very beautifully, I didn't even expect that thanks to the garland of balloons, the room would sparkle with new colors! I won't even talk about the quality, the balls still delight us and our visitors, although 2 months have passed since the order, I think this says something! Thank you for the timely delivery of balloons and quality, soon on March 8, I will contact you again!

07/22/2018 Gromov Nikolay Alexandrovich

It's good that now there are companies where you can order printing on balloons, it is very convenient, as it turned out, and quite inexpensive. We needed balloons for a corporate party, the company had an anniversary, 5 years from the date of opening, we wanted to decorate the room and give visitors a balloon that day. The balloons are of high quality, there are still 10 pieces in the meeting room, the order was delivered on time, and the cost pleased us, so many thanks!

06/25/2018 Ivan Sergeevich

I learned about this company when I was looking for an organization that would make balloons with a logo, the most adequate price was named here. I needed the balloons urgently, literally the next day, I was worried so that they could do everything, since I could not have moved the opening, but I was lucky with the choice of the company, very responsible, they delivered the balloons in the morning, even half an hour earlier than agreed ... Thank you for the promptness, high-quality printing on balloons and reasonable prices!