Data transfer to windows phone does not turn on. Using Windows Phone as a modem for Internet access. Windows Phone connects to Wi-Fi, but the Internet does not work
Not always, if you need to access the worldwide network from a computer or laptop, you have access to a WiFi connection point. The way out of the situation may be the ability to use Windows Phone as a modem, and it will take a minimum of steps and time to properly configure the device.
How to connect Windows Phone as a modem
The ability to use smartphones to connect to the Internet via a PC or laptop is not new option... Previously, this would require the use of a USB cable, but at the moment all the equipment needed to distribute the signal is already built into the mobile device.
The transmission is carried out wirelessly, that is, when this option is enabled, the smartphone becomes WiFi routerthat transmits the signal to other devices. This feature is available on all versions of the "tiled" operating system. However, there are some minor differences for each of them. software The 7th series was capable of supporting up to five devices at a time, and the OS of the 8th series and higher provides Internet connection for up to eight devices.
Tethering on Windows Phone activated by enabling this function in the "Settings" menu section. When activated, a special indicator will appear in the status bar of the smartphone. In order to start using the device to distribute an Internet signal, you must perform the following sequence of actions.
- Make sure the smartphone data transfer option is turned on and an internet connection is available. This can be done in the "Network" section of the settings menu.
- Return to the general settings menu and find the item called " Shared internet”.
- Activate the function by clicking on this item to display the "Enabled" mark.
Important before how to enable tethering on Windows Phone make sure this feature is supported by the current operator cellular communication... As a rule, distributing a network from a smartphone for other devices is called tethering and is paid additionally.
When you activate the "Shared Internet" function, a PC or laptop will independently detect a new available network.You just need to select the desired connection from the list provided.
How to use Windows Phone as a network source
Some owners of devices running Microsoft's operating system want to use their smartphone for a wired connection, rather than as a WiFi hotspot. Accordingly, the topic of how how to use Windows Phone as a USB modem... In order to establish a wired connection, access to the device's system files is required. And Microsoft does not provide it to its users due to the security policy. therefore Windows Phone as USB modem cannot be connected to a PC.
When using a mobile device as a connection point to a network, you can set a password and a name for it, which will be displayed on all connected devices. To do this, you need to do the following:
- - open the settings section in the device menu;
- - find the item "Shared Internet" and, holding it, select the option "Install";
- - fill in the fields that appear.
And at least use Windows Phone as USB tethering impossible, the wireless network will become fully accessible to nearby devices. However, it is worth remembering several features that accompany the operation of the device in such a mode.
- If you activate the shared network, you cannot use wireless connections from other sources. That is, the smartphone will only be able to transmit the connection of the mobile operator, and not the one that it receives from third-party sources.
- Before, how to use Windows Phone as a modem you need to familiarize yourself with the existing restrictions of the mobile operator. This is due to the fact that all devices connected to the common network function according to the same tariff planas the device itself.
Considering the question, how to use Windows Phone as a modem via wireless network is also worth noting that not all mobile operators provide such a service. Also, using a shared Internet, you can not only connect another device to the World Wide Web, but also create a separate local network.
IN modern life the Internet has closely entered our life, the user always needs constant access to online information, mail and social communication. Therefore, after purchasing a smartphone based on the Windows Phone operating system, probably one of the first things to do is to set up the Internet and so let's get started.
How to set up Internet on Windows Phone
The whole procedure is not difficult. But for some reason, it often raises a lot of questions, let's put everything on the shelves. Everything will take you no more than 5 minutes.
The first thing to do is to go to the "Settings" section and go to the "Access Point" item (usually it is at the very bottom). Then we select "Add" and enter the technical data for your operator.
Below are the settings of the main operators for Russia. All settings have been checked and if any changes we will update them in our article. In this sequence, access point (APN), username and password. The "-" sign means that we leave the field empty.
MTS:
internet.mts.ru
mts
mts
Megaphone:
internet
—
—
Beeline:
internet.beeline.ru
beeline
beeline
TELE 2:
internet.tele2.ru
—
—
MTS Belarus:
mts
mts
mts
Baikalwestcom Irkutsk:
inet.bwc.ru
—
—
For example, we will give a screenshot for the Megafon operator, this setting easy to produce because you don't need to enter anything other than the dot itself дополнительного
After entering the Internet settings in Windows Phone, in the "data transfer" mode, we select enabled, and in the paragraph fast 3G connection. Then we choose to save and test the Internet in any convenient browser.
If the Internet does not work, restart the device. That's all, if you have additional questions, write them in the comments.
It's hard to even think and imagine your smartphone (for example, Dell Venue Pro, HTC Arrive, HTC 7 Pro, HTC HD7, HTC HD7S, HTC Mozart, HTC Surround, HTC Trophy, HTC Titan, HTC Titan II, HTC Radar, Nokia Lumia 610, Nokia Lumia 710, Nokia Lumia 800, Nokia Lumia 900, LG Optimus 7, LG Quantum, Samsung Focus, Samsung Omnia 7, Samsung Focus Flash, Samsung Focus S, Samsung Omnia W) without a working Internet, which makes it possible to realize a large share of the capabilities of the devices on Windows Phone. Therefore, if you become the proud owner of a Windows Phone phone, first set up the Internet on it. Of course, you can try to get automatic settings from your operator, but often they either do not come at all, or they cannot be saved, so it is best to make the settings immediately and manually. Setting up the Internet is actually not so difficult and the whole procedure will take literally 5 minutes. First you need to go to the "Settings" menu and almost at the very bottom find the item "Access Point", which you need to go to. Surely you will already have some access points there, but it is better to just "Add" a new one, since the standard ones often do not work.
You can use the settings below. they have all been checked, and some were added by our users and also checked to work. No problems were found.
MTS:
Access point (APN): internet.mts.ru
Username: mts
Password: mts
Megaphone:
Access point (APN): internet
Password: leave blank.
Beeline:
Access point (APN): internet.beeline.ru
Username: beeline
Password: beeline
TELE 2:
Access point (APN): internet.tele2.ru
Username: no need to fill
Password: no need to fill
LIFE Ukraine:
Access point (APN): internet.life.com.by
Username: Leave blank.
Password: leave blank.
MTS Belarus:
Access Point (APN): mts
Username: mts
Password: mts
Baikalwestcom Irkutsk:
Access point (APN): inet.bwc.ru
Username: Leave blank.
Password: leave blank.
For example, I will show how these settings look on and, the Megafon operator, is very convenient in that you do not need to enter anything other than the access point itself!
You must first select "Enabled" in the "Data transfer" mode, and then select "3G" in the "Fastest connection" item. Once you save all the settings, try loading one page in Internet Explorer on your phone, or test the Internet in any way. If it doesn't work, restart the device.
For the Windows Phone operating system, I have already opened a special one on this site. This is the third article in this section, and in it I will write about how to configure the distribution of the Internet over Wi-Fi on a phone that runs on Windows Phone 8 (there is no official update to Windows Phone 8.1 yet, as soon as it appears, I will edit the article if there are changes in the Internet sharing setting).
After a few days of using the phone on Windows Phone, I really like this mobile system. This is something new and fresh, compared to Android, which I just got tired of. Now, we will turn Windows Phone 8 into a real one Wi-Fi router... Let's configure the distribution of the Internet, in the mobile operating system from Microsoft, this function is called "Internet Sharing".
To be honest, I really liked the way this feature is done in Windows Phone 8. It's simple, and everything works like a clock, compared to the HTC One V (Android 4.0). I think the Internet Sharing feature looks the same on all Windows Phone 8 phones. I'll show it using the Nokia Lumia 925 as an example.
We just need to turn on the mobile Internet (data transfer)... You can use 2G, 3G and even 4G networks. It all depends on your phone, provider and coverage. Further, in the "Shared Internet" section, you just need to enable the function, set the network name and password to it. And that's all, our phone will distribute the Internet, which it will take from the mobile provider. You can connect others mobile devices, tablets, laptops, TVs, etc.
And now for more details.
Windows Phone 8 as a Wi-Fi router
First, you need to enable data transfer. Simply put, you need to enable mobile Internet if you have it disabled. Go to settings (being on the desktop, swipe left and select "Settings" in the list)... Then we look for the item “ data transfer“, Go into it and select“ included“. Below, you can specify the fastest 2G, or 3G connection.
Attention, for using mobile internet, the operator can withdraw money. Sometimes, not a little money. Check with the operator about the tariff at which you can access the Internet. Now, operators offer not expensive tariffs, for example, pay per day.
When the Internet is working, the corresponding icon should appear on the notification panel.
A window will appear in which you need to change the name of the Wi-Fi network that the phone will broadcast, and the password for this network. Or you can leave the data that has already been indicated. Click on the “ ready“.
Everything, our phone on Windows Phone 8 is already streaming Wi-Fi network, you can connect other devices to it. You can connect up to 8 devices at a time. That's enough (on Android, maximum 5 devices)... By the way, about the fact that the general Wi-Fi access to the mobile internet, you will recognize the icon that appears on the notification bar.
To connect, just select from the list of available networks (on the device you want to connect to the internet)created by us network, and specify the password, which can be viewed in the section "Shared Internet".
On a laptop, it will look something like this:
Read about how to connect your Android device. Oh, I wrote the same.
To stop sharing the Internet, just turn off this function in the "Shared Internet" section.
By the way, you can set the limit for mobile Internet, for example, per day, and the phone will warn you when the limit will end. So, you can save yourself from additional costs... After all, the Internet over the limit, as a rule, is not cheap.
This is done in the same place, in the settings. Just swipe left to go to the “ annexes“. Select “ data control“. Click on the “ set a limit“, And follow the instructions.
A very useful function that can be useful not only when setting up Internet sharing, but also during normal use of the mobile Internet on your phone.