Onlime (Onlaym) Internet connection and setup. Free virtual router for distributing wi-fi from any computer

This is not at all difficult if you understand what exactly happens during our actions. All configuration takes place on the company's router TP-Link ... Why exactly TP-Link? After talking with a variety of routers, I was pleasantly surprised by the stability of their work: I set it up once and forgot about it for several years, without freezing, cutting speed and other unnecessary nonsense)

We turn on the router, if the bulbs do not start blinking, we begin to fumble in search of the ON / OFF button found in some models

On the back there is a sticker with the address, as well as Username (Username) and Password ( Password) to enter web—interface router, where the configuration will take place.

We connect with the cable included in the kit, a computer or laptop with a router, using YELLOW ports 1-4.

In the browser address bar enter the learned information 192.168.0.1 and click Enterappears authentication window (identification), into the fields username and password which we enter the data from the sticker, then OK

We land on the page fortunes (tab Status).

Let's go from top to bottom, first goes firmware version (Firmware Version) and model revision (Hardware Version).

LANshe The local network(Local Area Network) in our case, these are the network characteristics of the router - factory 48-bit network device address (MAC address), address in a network built on the protocol (set of agreements) IP (Internet Protocol Address), subnet mask(Subnet Mask) is needed to define the boundaries of [sub] networks, if any)

Wireless - everything related to Wi-fi - broadcasting wireless network(Wireless radio), her name (Name he is Service Set Identifier), operating mode (Mode) supporting devices b, g, n iEEE standard 802.11 data transmission, channel width (Channel Width) radiation of electromagnetic waves, channel of work(Channel) the most free is selected automatically, maximum speed limit (Max Tx Rate), to fix again ( MAC address) and combining multiple access points to create wireless networks ( Wireless Distribution System)

WAN — The global computer network (Wide area network) this is the most interesting, everything related to the Internet connection. Already familiar to us MAC and IP addresses, subnet mask Subnet mask, and network gateway(Default gateway) by default, it is through it that traffic from the Internet passes to us, domain name server(DNS Server) converts understandable and easy-to-remember site names, for example yandex.ru, into understandable for network devices IP addresses. Try to enter this IP 87.250.250.3 into the address bar and you will understand right away!) Completes the list connection duration (Online Time).

Traffic StatisticsInformation exchange statistics, this column records received (Received) and sent (Sent) bytes and packets.

System up timeThe time of continuous operation of the router, for 8 days it never needed to be rebooted)

Onlime

Here the number of movements is minimal, you just need to go to the section Network —> WANand in the field connection type(WAN Connection Type) choose Dynamic IP, takes care of the network settings Online! Of course save settings pressing the button Save at the bottom of the page)

After everything is configured, we connect to the remaining socket ( WAN) router internet cable and enjoy life!

If you use the Internet Beeline

We also set up the connection to the network in the section Network —> WAN, only in this case connection type(WAN Connection Type) choose L2TP / RussiaL2TP... The situation with L2TP more interesting than simple Dynamic IP... So our guest is Layer 2 tunneling protocol(Layer 2 Tunnel Protocol) allows you to create virtual private network (Virtual Private Network) on the Internet.

In field username (User Name) write down the number from the contract with the provider starting with 0895 .

Password put in Password... Should be in the contract, for example, may coincide with No.

We also need to enter vPN server address (Server IP Address / Name), he tp.internet.beeline.ru

The router will receive the rest of the network settings automatically thanks to dynamic host configuration protocol (Dynamic Host Configuration Protocol) to the assigning IP the address, gateway (Gateway), domain name server (DNS).

We press Saveand dive into the Internet, if paid for of course)

Provided that we still connect the Internet cable coming to the apartment in ( WAN) router socket!

If you use Netbynet or Akado Internet

In this case, we need, the first section in the router settings, where we should look, is Networkthen - MAC Clone, there are only two fields here: MAC address of our computer (Your PC's MAC Address ) and MAC address of the router (WAN MAC Address). All we have to do is do them IDEAL, for this we press Clone MAC Addres(copy MAC address) and then Save!

Now only remains in the same section Network visit tab WAN and choose connection type (WAN Connection Type) Dynamic IP (Dynamic IP), the rest of the network settings will "arrive" automatically from the server of the Internet provider. Remember the button Save!

And also about connecting a cable with the Internet, to the socket ( WAN) router for the final result)

These are such different Internet providers)

Leave a request for Wi Fi Internet +74951202999 in Moscow, without wires! Conduct home Wi-Fi ONLIME to your apartment within 30 minutes! Order an urgent wireless connection of the apartment to ONLIME Rostelecom in a minute on the website and in 3 minutes on the phone.

By connecting ONLIME, we will set up for free Wi-Fi routerowned by the client. Or we will provide ours for free rent. You can also connect the Internet directly to your PC - by wire.

The ONLIME provider connects premium high-speed fares for the lowest possible price.

100 Mbit Wi-Fi Internet and Wi-Fi router "Premium"

1. The best tariff for a large family from ONLIME: 100 Mbps, Gigabit WiFi router premium NetGear. 125 TV channels with a TV set-top box for 550 rubles on an ongoing basis!

2. Don't watch TV? Tariff "ONLIME maximum benefit" 500 rubles: 100 Mbit / s unlimited wireless internet, Premium Gigabit Router. Connect to the address the best Wi-Fi tariff +74951202999 in Moscow! Wireless internet connection with maximum range.

3. Do you have your own router? Connect a dedicated 100 Mbit network for 400 rubles on an ongoing basis. We will connect Fi-Fi equipment available for connection in the apartment for free.

4. Need the cheapest one, but fast internet? Unlimited 60 Mbps and a Standard router for 400 rubles per month. Forever and ever.

5. Enjoying the best internet capital, do not forget to leave a review on the Internet and in social networks, recommend ONLIME to friends, colleagues and neighbors;)

Why is the Internet from ONLIME the best?

ONLIME guarantees the quality of communication and affordable rates for Internet TV. FROM ONLIME Rostelecom it is easy to work with mail, view news, communicate on social networks, watch videos and movies. On a computer, Wi-Fi works very well.

Why choose unlimited Wi-Fi from ONLIME:

  • - The minimum cost of services for package offers;
  • - Internet + Router from 400 rubles per month;
  • - Internet + Router + TV from 550 rubles per month,
  • - Completely free connection to Wi-Fi of the client's computer and router!

Why do residents of the capital choose ONLIME?

  • - The most URGENT connection, in a few hours,
  • - Real time and money savings,
  • - Guaranteed stable speed and connection - the quality of the services provided is separately indicated in the Agreement with the subscribers. All problems are eliminated promptly, the systems are configured both remotely (at the request of the client and depending on the breakdown), and with the visit of the masters to the house.
  • The connection to the ONLIME Internet is not affected by weather conditions and other factors - for example, absence landline phone in the apartment, fire department burglar alarm, pulling the cable through the riser, etc.

By connecting to the ONLIME Internet, you purchase Premium services for a reasonable price! Order an urgent visit of a specialist home right now +74951202999 and online.


Today, in Moscow, Online is one of the leading Internet providers. It is not an independent company, but a part of the famous company Rostelecom, which operates in the capital under such a bright and unusual name. The user can easily recognize the company by the lime color prevailing in the design of the site and printed materials.

Company services and related equipment

When a client connects to the Internet Online at some tariffs, the router is a gift, for some the company offers to purchase it from them, since their routers already have the necessary settings, and it will be much easier and faster for a specialist to connect. The company recommends several different routers from different companies, which the user can purchase and configure himself if desired.

The most popular routers used in Online, how to set up a router?

Online uses a dozen different routers. We will show you how the most popular of them are configured, the rest are usually configured by analogy.

Internet provider OnLime provides access to the global network over a widespread ethernet technologies... For the connection, a standard UTP cable is used, which is brought into the apartment by the Internet setup wizard. FROM detailed instructions to connect different routers can be found on the official website of the Internet provider.

Connecting cables

Find the "Internet" or "WAN" port on the back of the WiFi router. It connects to the cable, led by the Internet provider OnLime to the subscriber's premises. Connect computers and other home devices to the remaining ports, which are connected via an Ethernet cable. Insert the plug of the power supply into the "Power" connector. After that, plug the power supply into an outlet and press the power button of the router, if there is one on the case. When the connection is established, the corresponding indicator on the front of the device will light up.

Establishing and testing a connection

Open the control panel of the router using any of the browsers installed on your computer. In the address bar of the program, enter the IP address of the router. It can be specified on the panel of the router itself or in the instructions for it. An authorization window will open, in which you need to specify the username and password from the device. If you have successfully entered the settings, click the "Click'n'Connect" link in the "Network" section. The connection wizard will open, at the first step of which you will need to select the "Static IP" value.

Note! No additional data entry is required for this type of connection. Unlike PPPoE protocol, communication with OnLime is established without specifying a username and password.

After selecting the type of connection, the connection wizard will ask you to check the work result. To do this, enter any address in the text box and click Next. The central part of the window will display the status of the cable connection and the ability to access the Internet OnLime from your computer. If any errors occur, restart the WiFi router and repeat the setup. You can also use full manual configuration instead of step-by-step parameterization via the Click'n'Connect wizard.

Tutorial video: Setting up the Internet and Wi-Fi network OnLime

Setting up WiFi on the router

In the next step, enter the wireless settings:

  1. SSID;
  2. Encryption key PSK.

Use a complex password consisting of numbers, special characters, and letters in different cases. This will help avoid network hacking and third party access to your data. It is also advisable to change the password from the web interface so that outsiders cannot enter its settings from your computer or when connected to WiFi.