What animals can be made from plasticine. How to mold animals for children from plasticine: domestic, wild, sea. Step-by-step instructions with photos for beginners. Plasticine modeling: step-by-step diagrams of original crafts

Plasticine is a magical material with which you can make incredibly light and beautiful figures. These can be fairy and cartoon characters, buildings and plants. Plasticine animals deserve special attention. For children, sculpting will be an incredibly exciting and educational activity, which cannot be distracted from for a minute.

Plasticine is a magical material with which you can make incredibly beautiful figures.

Plasticine sea dwellers turn out to be unusually beautiful. Even a child can do such crafts with his own hands. In order to mold a crab, you need very little attention and patience.

Plasticine sea inhabitants turn out to be unusually beautiful

Sequencing:

Make blanks for the body, a pair of claws and eight legs.
The largest ball, from which the body will be made, needs to be pressed down a little.
To make paws, mold sticks from eight blanks.
Attach four legs on one side and four more on the other.
From the two remaining blanks, form claws and attach them to the forelegs of the crab.
Stick small circles of lighter material on the body.
Make eyes.

Gallery: plasticine animals (25 photos)

We sculpt wild animals in stages

Wild animals are of particular interest to children, since meeting them in real life is not for everyone. We have to be content with their image in the pictures. That is why sculpting a lion cub, a squirrel or a wolf from plasticine will be not only exciting, but also informative.

Wild animals are of particular interest to children, since not everyone has to meet them in real life

Work progress step by step:

Make a circle from the yellow mass and attach a couple of small parts to it, forming the cheeks of the animal.
Make a spout out of brown material and fix it between the cheeks.
Attach eyes a little above the cheeks.
Blind the body in a drop-like shape and slightly extend the tip of this blank.
Use a match to connect the head to the body.
Form many brown circles out of brown material and fix them on the animal's head - you get a mane.
Now blind the paws and stick three small orange circles on each of them.
Attach these details to the torso.

Make a yellow ponytail with an orange brush at the tip and stick it to the craft.

Modeling from plasticine: turtle (video)

Pets: how to make a dachshund, cat, cow, pig

Plasticine animals can be very funny and colorful. The process of making them is always accompanied by positive emotions. Even cute pets made of this material become an excellent decoration for a children's room.

Plasticine dachshund

In order to mold such a dog, it is enough just to adhere to the scheme exactly:

Roll a ball of black mass and draw it out in the form of a long and narrow droplet. This detail will further be the body of the dog.
Lift the part up from the wide side.
Stick the brown mass on the abdomen with an even layer.
Form a small ledge - you get a neck.
In order to get the head, you need to roll a black and brown ball.
Pull out the black element in the form of a drop, then stick the brown part to its lower part and stretch it out a little.
With your finger, stretch the black material a little over the nose and highlight the eyes with a stack.
Now add the pupils and form the ears.
Attach the head to the neck with a match.
Make the upper parts of the legs from black material and attach brown elements from the bottom.
Fasten the legs to the body.
Roll up a thin tube and stick the side, slightly lifting it up.

How to blind a cat

If you follow these simple instructions, you will be able to quickly and easily make a funny cat - one of the most beloved pets. Children will be able to dazzle such toys on their own. senior group kindergarten.

If you follow simple instructions, you will be able to quickly and easily make a funny cat.

Working process:

Using a stack, divide the block of plasticine into three equal parts.
Roll balls from two parts, and divide the third into six more parts.
Roll sausages from four small pieces - future legs.
Roll one more small detail a little thinner to get a tail.
Divide the remaining small detail into a couple of identical pieces and make ears from them.
Form the head and body, and then connect these two elements with a match.
Attach a tail and legs to the body.

Blind eyes and tongue.

Cow: how to blind with your own hands

The cow sculpting scheme is quite simple and boils down to the following steps:

Roll balls of brown and orange material, connect them together.
Attach the eyes, make cuts in the form of nostrils, and make a smile with a stack.
Make horns and attach them to the head.
Attach ears to the future cow.
Blind an oval out of the brown mass and squeeze much, stretch the neck.
Make legs and attach hooves to them, made of gray material.
Blind the udder from the beige mass.
Make a tail and then connect all the details.

Pig: sculpting in stages

The funny pig is molded quickly and easily. You just need to strictly follow the instructions:

Form the torso in the shape of a barrel.
Roll four balls and attach them to the body.
Roll up another, but already a large ball and also attach to the body.
Form a patch and ears.
Draw the nostrils and eyes with a match.

Plasticine animals can be very funny and colorful.

Attach a crocheted ponytail.

Funny animals from the zoo: monkey, snake, sloth

You can create your own zoo using ordinary plasticine. A variety of forest, wild and domestic animals will happily settle in it. Modeling will bring a lot of fun, and the made figures will be great toys for little ones.

How to blind a monkey: step by step instructions

An unusual monkey is obtained from brown and yellow plasticine mass.

It is molded according to the following scheme:

Prepare a piece for the head from a brown mass and a couple of small yellow elements to form the face.
Attach yellow cakes to the head, placing them as tightly as possible to each other.
Draw with a stack of eyes, mouth, nose and wrinkles.
Make ears.
Blind the torso in the shape of an egg and stick a yellow cake to it.
Using a match, connect the torso to the head.
Make four long tubes from the brown mass.
Stick yellow circles to each of the tubes and make cuts on them with a stack.
Stick the monkey's limbs to the main part.

Monkeys can be of different colors

Finally, attach a long tail to the animal.

Snake: sculpting in stages

A very realistic snake is made according to the following instructions:

Roll a sausage of the required length from the plasticine mass.
Select the head, giving more volume in this place.
Draw the eyes and nostrils.
Make cuts along the entire back with a stack - you get scales.
Attach a long red tongue to the front of the head.
Bend the snake's body.

You can apply an additional pattern to the snake's body

Tip: To make the snake's body flexible, you need to lay a wire inside.

How to make a sloth from plasticine

Modeling a sloth is reduced to the following actions:

Form the head and body of the animal.
Blind paws and claws.
For the future muzzle and tummy, roll up balls and flatten them into cakes.
Make eyebrows in the form of droplets.
Make eyes and a nose from small pieces.
Collect all the details of the structure together.
Draw a mouth with a stack.

Sculpt an octopus: step by step instructions

Octopus is one of the most unusual inhabitants of the seas... Naturally, the process of sculpting it has its own characteristics, but it does not cause difficulties. Even a small child can cope with this task by following step-by-step instructions.

Let's talk about how to mold animals from plasticine. Modeling is considered useful at any age. Thanks to this type of visual activity, children receive the necessary knowledge about the shape and properties of objects, fix colors and shades. During practical activities the baby develops well motor skills.

You can sculpt with children after a walk in the park and at the sea. What you see on a walk can be depicted as But after visiting the city zoo it will be interesting to consolidate knowledge about wild animals in the process of modeling. What animals can be molded from plasticine? Absolutely any. After the excursion, the child can tell whom he met, who he liked the most, which animals are representatives of our country, and which live in distant hot countries.

How to mold animals from plasticine?

Studying animals, a child must understand what parts of his body he has, what shape is his body, head, whether there is a tail, what length and shape it is. You will also need knowledge about the color of the character's coat, whether there are horns on the head or not, what shape and size the ears are. Why does a giraffe have such a long neck? At the same time, the child recognizes the properties of plasticine. For example, when creating a giraffe, the baby must understand that such a long neck will not be held upright by itself, but will eventually fall on its side under the weight of plasticine. To prevent this from happening, you need to use insert elements, for example, a toothpick or a stick. Thin and long legs, such as those of a deer or ostrich, are also strengthened.

Sculpting a tiger

How to mold animals from plasticine, read the article below. Let's start with an inhabitant of the eastern regions - a tiger. You will need orange, black and yellow plasticine. The largest piece of material will go to the predator's torso. It is made in an elongated oval shape. Four identical paws are attached below. A round head is planted on the front of the body, on the crown of which there are two semicircular ears.

The tiger's tail is long, with a black tassel at the end. The muzzle of the beast is formed from three flattened yellow balls. With a pencil, dots are perforated on them. The nose itself is black, attached to the center of the muzzle. The eyes are small round black balls that are slightly pressed into the front of the animal's head. Last of all, long thin sticks are made of black plasticine and attached along the entire body. These are the stripes on the tiger's fur.

Chimpanzee

If you do not know how to mold animals from plasticine, read our recommendations below. The next step is to figure out how to mold a monkey using gray and peach colors. The head and body of a primate is sculpted from balls, only the body needs to be made larger. The arms and legs of chimpanzees are represented by long and thin rods, which are attached to the body with the fingers from above and below.

Semicircular ears consist of two parts. The outside is gray and the inside is peach. The hands and feet are sculpted using a stack - a special plastic knife for plasticine. The last thing is the work on the muzzle. A ball is rolled out of light plasticine and attached to the bottom of the head. Above you need to cut out the eyes. To do this, the plasticine is rolled out in a thin layer and the required shape is cut out in a stack. Dots are put in the center with a pencil.

Elephant

You can mold animals with a child from plasticine, starting with an elephant. This is an amazing animal with a shape that is easy to recreate with the help of plasticine. The long trunk-nose is attached to the large head in front. For the elephant to breathe, holes are made on its end part with a pencil, and stripes are drawn in a stack. White canines are located on either side of the trunk. Above the nose, on a large massive head, there are eyes. They are made of two colors. White circles are on the bottom and black ones are the second layer.

A large head should hold firmly to the body, you can strengthen it with a toothpick. The elephant's legs are known to everyone for their pillar-like shape. They are sculpted from thick sticks and placed on the bottom of the stomach. The tail of the animal is small and thin, narrowed downwards. There is a small brush at the tip.

The most recognizable part of an elephant's body is its huge ears. They are molded by pressing the balls with fingers on both sides. In the same way, the middle of the ears are made in white.

Toothy crocodile

Let's look at it step by step using the example of a crocodile. The body of an amphibian is formed from a piece of green plasticine. The tail and jaw are stretched. With the help of a stack, an incision is made in the oral cavity so that the lower jaw is slightly thinner than the upper one. And pressing down from above, the tip is dulled, and the nostrils are pressed through with a pencil. Also, fingers make dents on the forehead of the animal and eyes are inserted into the cavity - white balls with black dots. You can make orange eyelids like in the photo below.

The paws are made of the same size and claws are attached to each paw from white plasticine. It remains on the back to make a comb. To do this, you need to form balls from small pieces and put them on the back of the animal along an even central line, pressing down. A pair of sharp teeth is attached to the mouth if desired.

Giraffe

To make such a tall craft strong, you need to insert a wire or a wooden stick inside. A body is sculpted from a large piece of plasticine together with a long neck and head, which bends forward. Small horns and ears are attached to the top of the head.

Then four legs are made and applied with fingers from the bottom of the body. Several circles are glued to the body and neck of the animal. It is interesting to make a giraffe out of yellow plasticine, and the spots on the body are brown. Thus, the craft will look more like the original.

Now you know how to mold animals from the zoo from plasticine. Get to work with children. Good luck!

Looking through news from friends and communities on Vkontakte, you often find something interesting. For example, today I noticed some good pictures that tell about how to sculpt animals from plasticine... I edited them a little to make it clearer, and I post it to you. Perhaps both you and me in the future will need them. So. Stock up on plasticine or modeling clay and go!

Let's start by learning from animals that are easy to make, gradually moving on to more complex crafts.

Mouse

The easiest way is to mold a mouse from plasticine (or special clay). Make a blank for a white body, stick a pink nose and ears to it.

And then the same pink paws and ponytail.

Snail

The snail is already a more complex craft, but still one of the simplest.

Make a blue sausage. Start twisting the end of it until you get something that looks like a snail.

Then add the body and head.

At the last stage, you can attach eyes, a nose and something similar to ears to the animal's head.

Rooster (or maybe a chicken)

We start sculpting from the body. Add three small balls to the yellow oval - a comb, as well as blanks for the eyes and beak, as shown in the picture below.

Now we sculpt the wings.

At the third stage, we make a tail from multi-colored sausages.

And finally, the legs.

Frog

Start sculpting a plasticine frog by making a body blank. In the first step and beyond, you will need a sculpting stick.

Now insert the tab into the hole.

Add eyes and nose.

Now you need to make the legs.

And at the last stage - pens. That's it, your frog is ready!

Donkey

The donkey is the most difficult craft of all that I have described on this page. But I think you can do it, especially if you practice well.

Plasticine sculpting is an incredibly fun and interesting activity for children. Kids like to sculpt everything that surrounds them: houses, flowers, their favorite toys ... However, most of all they like to sculpt animals. Why?

In the course of a long study of behavior and psychological characteristics children under 4 years old, it was found that children of this age do not identify with people, but with animals. Therefore, in the process of drawing or creating a domestic or forest animal with the help of plasticine, the child expresses his own essence.

Modeling animals from plasticine with a child

Working with plasticine in every educational institution is not in vain - this material is necessary for kids not only for fun, but also for the development of fine motor skills, for the manifestation of the creative abilities of children.

Today, on store shelves, you can buy beautiful, soft, bright plasticine, in the form of dough, pasta, balls. With such material, it becomes possible to make fairy-tale characters, favorite cartoon characters, etc.

By the age of three, the child is already completely ready for creativity using plasticine. From the side of an adult, it is enough only to offer the children what to blind, and also, if necessary, show how to do it. At 3 years old, a child not only can engage in lesson creativity, but must also do it, this is his internal necessity... While modeling, he unconsciously develops memory, perseverance, concentration of attention, etc.

In modern kindergartens, recently it has gained quite a lot of popularity plasticineography.

What is needed for this? Real trifles - just plasticine, a piece of cardboard and a plastic board and a little imagination! Having all this, the child can start creating his own picture from plasticine.

You can sculpt animals or the world around the child in another way - for example, using applications. Amazing animals are also obtained when using ball plasticine, which provides many additional opportunities for a little creator. For example, with the help of ball plasticine, you can stick around an ordinary jar or glass, and then we will get a beautiful pencil holder.

It is much more convenient to sculpt animals from plasticine if you use various additional materials. Autumn offers us many options for crafts, when you can easily find acorns, beautiful bright autumn leaves, twigs, etc. on the street.

Plasticine sculpting: getting started

In order to help a child learn how to sculpt animals correctly, it is necessary to teach him how to work with the material correctly.

You need to work on a special board made of plastic. It will not allow you to stain the surface of the table or furniture. Often, additional molds of various animal figures or geometric shapes are sold in a kit for small children, which will introduce the child to the material and its capabilities. However, this is only suitable for the first lessons with plasticine, and not for an experienced kid.

kdcnov.ru

It is extremely important to teach the child the basics of working with plasticine - how to knead the material, how to roll it, the main figures that you can sculpt yourself (for example, a ball, sausage, bagel, etc.). As soon as you see that the child has learned to sculpt the most basic shapes, proceed to more complex designs. The main thing here is to work, work and work again. The more practice, the faster the child will develop their creativity and show them to others.

If the child does not yet have sufficient strength in his hands to knead the material, help him with this - knead the plasticine until it becomes soft and plastic enough. It will be much easier for a child to work with such properly prepared and warmed up plasticine in his hands. And at the end of the work, be sure to wash your child's hands thoroughly, make sure that there is no dirt left under the nails.

Modeling animals from plasticine: a master class on making a horse

There are different variations of horse sculpting (depending on the age of the child), but even a kid will be able to blind the simplest horse preschool age... You can invite your child to mold a horse from your favorite cartoon, a beautiful thoroughbred horse, or a fabulous unicorn or pegasus.

Choose 2 main colors for sculpting a horse, prepare 2 small objects that will act as eyes, and 4 matches or wooden toothpicks.

First of all, we roll sausages from plasticine. To the bottom, each sausage should expand slightly - this is how we create the future legs of our horse. To make the legs as firmly attached to the body as possible, insert a toothpick into each leg.

The next stage is sculpting the horse's body. To do this, we sculpt a thick short sausage, bend one edge up a little and narrow it a little - this will be the neck of the future horse. You can also insert a toothpick into it so that you can then fix your head on it.

You can blind the head by making a small oval blank, at the end it must be slightly narrowed. With the thick end of the head we attach it to the neck, putting it on a toothpick or just sticking it to the body. In the same way, we connect the legs with the body of the horse.

It's time to make 2 more small balls out of plasticine, and then flatten them - these will be horse nostrils. Let's make 2 more small balls and get the horse's eyes, into which you will need to insert 2 small objects (beads, buttons, etc.).

To mold horse ears, you need to invite the child to make 2 balls, and then make droplets out of the balls - slightly pull the ball out from one end. The other two flattened balls also produce excellent hooves.

It remains quite a bit - to roll a piece of plasticine into a tape and attach the mane in place, and also make the tail in exactly the same way as the mane.

Modeling animals from plasticine: a master class on making a cat

There are several ways to blind a cat. Here's the easiest way.

For this method of sculpting, you will need to use a special knife for cutting plasticine, the clay itself and several wooden toothpicks. This method is perfect for sculpting the smallest.

Take a piece of plasticine and divide it into 3 even parts with a knife. It is necessary to roll a ball from one part - this will be the body. We separate a small piece from the second piece, from which we will further make a tail, and from the main mass of the second piece we sculpt the head. Divide the third part of the plasticine into 6 equal parts and roll balls from them.

We roll the flagella out of 4 small balls - these will be paws, divide the fifth ball into 2 parts and sculpt 2 ears, we also divide the sixth into 2 identical pieces (for the cheeks) and separate a very small piece (for the nose).

The only thing left is to connect all the parts with the head. The ear balls can be shaped like a circle or triangular with a little flattening. We insert a toothpick into the head, on which the whole body of the cat will be attached.

In the same way (with the help of toothpicks) we attach the flagella-legs to the body. You can additionally mold a small red flagellum from red plasticine, which will become a cat's tongue.

Any animal is molded from the most basic shapes that just need to be arranged correctly - balls, flagella, ribbons, sausages.

Help the child show his imagination and just be there - this will be quite enough so that he himself can sculpt animals or people from plasticine, the phenomena and things surrounding him in life.

Modeling from plasticine is an interesting, useful activity for the development of imagination and fine motor skills of a child. For sculpting, you need a board and plastic knives, with which it is convenient to cut plasticine, smear, make holes, patterns. To make modeling easy and enjoyable, you need to choose high-quality plasticine.

Types of plasticine

Good material kneads well, has no grains. Today, there is a lightweight aquaplasticine on sale that does not sink. Figures made from such plasticine can be played in water. Fluorescent plasticine, which is distinguished by brightness of colors and plasticity, is in demand. The addition of wax ensures that the clay does not stick to the hands and does not stain them. The effect of mother-of-pearl, sparkles - all this makes the material interesting for children.

Children can be offered to sculpt flowers, mushrooms, fruits, vegetables ... But the most interesting thing for a kid is to create figurines of animals and fairy-tale heroes.

So, we sculpt animals from plasticine

You should not immediately impose complex shapes on the child, let's start with the simplest.

We use plastic molds. Roll out the plasticine on the board with a layer of 0.5-1.5 cm. Take the plastic molds for sand, of which there are many in sandbox sets, and squeeze out the figure. For different animals, take plasticine of different colors. Lay out the figures on cardboard or a board - soon you will have a whole zoo! Molds are also sold in sets with other sculpting materials: polymer clay, modeling paste.

Embossed mosaic panel

On the album sheet we make a sketch: a bunny, an elephant, a bear cub. We roll the plasticine into a "sausage" with a diameter of 1 cm and, cutting off identical pieces, make balls, which we then squeeze into "buttons", attaching them to the picture. Good plasticine sticks to form a mosaic applique. It is very interesting for young children to press the colored buttons.

Finally, it's time to start making three-dimensional figures. Modeling animals from plasticine for kids is not an easy task, so we start with the most simple ones.

We roll out the yellow plasticine with a "sausage" on the plank, make the future tail thinner, the head a little thicker. Let the length be 10-15 cm, thickness 1.5-2 cm. From green and brown plasticine we make small balls per 1 cm of the snake's length - 1 green, 2 brown. We stick on the back a row of green balls, which, when pressed or smeared, should turn into specks. Along the green row of spots on both sides, place them on a row of brown ones. With our fingers we shape the head, attach the eyes, draw a mouth (or cut it, making a smile).

Hedgehog

For the torso, we form an egg-shaped lump the size of a walnut. We make the part where the face will be, conically elongated. A piece of length and thickness like two matches folded side by side, cut into 4 equal parts, form oblong legs and, using pressure with a plastic knife, smooth it to the body. We make a black nose, eyes, draw a smile with a stack. We make thorns from toothpicks.

Pink pig

Roll out the plasticine so that the body becomes oblong, we barely stretch the muzzle. It will be interesting for the child to attach a button-nose, black small eyes. For the ears, cut out 2 triangles from a thinly rolled (4-5mm) plate, which we attach to the head. For the legs, we take a lump that is 1/10 of the size of the body, divide it into 4 equal parts, form cylinders and attach it to the body.

Little whale

Kitenko is also easy to do. We form a “comma” from blue plasticine, we make triangular fin plates on the body and on the tail. The mouth can be glued from thin strips of white or purple colors, or you can draw with a knife.