How to set up an Internet phone lji. Ways to connect and configure the Internet on a smartphone. Connecting your LG TV to the Internet via a router

Hello dear subscribers and guests of my blog! In today's issue I will tell you about the features of setting up the Internet on a mobile phone. A mobile phone is the very first handy computer tool with which a person can access the Internet.

In order to be able to be online in social networks, read news, use a navigator or check mail, you need to set up an Internet connection on your phone. Not everyone knows how to properly configure the Internet on their phone. Internet setup is divided into two types: automatic and manual. In this material, we will consider all kinds of connection options mobile device to the Internet.

How to set up the Internet on your phone in an automatic way?

One of the easiest and fastest ways to connect your phone to the Internet is to order an automatic configuration service from your mobile operator. The option to get settings for Internet access is free for all existing Russian operators, and does not depend on the connected tariff plan... To receive automatic settings, you need to call from mobile phone to the call center, and then leave the appropriate request. After some time, the phone will receive automatic settings for the Internet, and the user will need to agree with their installation. To do this, open a message and then select the "Set settings" button. This method is one of the most popular to connect your phone to the Internet.

There are cases when, after receiving automatic settings on the phone, the device cannot access the network. In this situation, you will need to carry out the following manipulations:

- Make sure that the appropriate tariff for Internet access has been connected.

- Check availability money on a mobile account.

- Make sure that the settings have been installed on the phone, for which you must click on the "Set settings" button.

- Reboot the device.

Most Android phone models may not support the option of automatic configuration to mobile operators. A number of such operators include: MTS, Life and Beeline. If, nevertheless, your device does not connect to the network, then you will need to create the settings yourself. To do this, you need to order settings from your mobile operator, for which visit the official website from a computer, fill out required fields and send the settings to your phone. There is also a way to use short numbers, which must be dialed from a mobile phone that needs to be connected to the Internet.

For operator Life: dial * 123 * 6 #. You can also send an SMS-message to number 123 with the text "INTERNET".

For the Beeline operator: you need to dial the command * 110 * 181 #.

For the operator Megafon: you need to send an SMS-message with the number "1" to number 5049.

For MTS operator: visit the official website or follow the link http://www.mts.ua/ru/online-services/settings#settings-auto. Thus, the 3G service will be connected.

It is important to know! Many users get the settings automatically on their phone after the first SIM card connection.

Now let's pay attention to manual Internet connection settings on the phone for one of the most popular operator in Russia - MTS.

How to set up the Internet on your phone manually?

Manual method of setting up a connection for an MTS operator

Mobile company MTS provides communication services not only in Russia, but also in countries such as Belarus and Ukraine. If the device cannot connect to the Internet by receiving automatic settings, then the following manipulations should be performed:

1. Go to the main menu on your Android device.

2. Go to the "Settings" menu, and then find the "Wireless networks" or "Mobile networks" section.

3. After that, you need to enable the mobile Internet function. This can be done by moving the shutter to the right position. If you do not enable this function, you will not be able to connect to the network.

4. A list of mobile networks will then be offered. You need to find the appropriate MTS Internet profile or create one yourself. To do this, you need to go to the "Access points" section, and then select the appropriate profile from the proposed list or click on the option to create a new access point. The screenshot below shows the access points for connecting to the Kyivstar mobile network, but these points will be presented in the same way when installing the MTS SIM card.

4. If you need to create an access point manually, then you should click on the above button, then specify the Name - MTS, Login Username - mts, Password - mts, as well as the address of the connection point or APN: internet.mts.ru. All other parameters remain unchanged.

5. After that, you can start trying to access the Internet from your smartphone. Manual configuration for operators such as Beeline and Megafon is almost identical, so there is no need to consider them separately. In order to clarify the address of the access point, you will need to contact the operator.

How to connect 3G connection?

To take advantage of high-speed internet 3G, you will need to configure your device. At the same time, it is important to pay attention to 3G tariffs and connect to the appropriate service, otherwise the use of the Internet will turn into colossal waste.

To configure your phone to connect to a 3G network for operators such as MTS and Life, you need to order automatic settings. If for some reason you cannot do this, then you should create an access point manually. To do this, you need to do a number of the following manipulations:

- You must click on the network mode selection panel.

- Select the item GSM / WCDMA.

After that, close the settings window, and then restart the smartphone. After that, you can see the appearance on the smartphone screen of a high-speed 3G connection.

On some more modern smartphones, you only need to set the preferred networks: 2G, 3G or 4G.

Now the smartphone will automatically connect to the mobile Internet using 3G technology, if, of course, this type of coverage is available in your area.

Features of manual Internet settings from the operator Life

Consider also the features of manual configuration of the Internet access point of the mobile operator Life. This is Ukrainian mobile operator, which requires special attention to the settings for the Internet. To connect the mobile Internet on Life, you must perform the following manipulations:

We go into the settings of the smartphone, after which we select the item "Mobile networks" or "Connections". It all depends on the phone model and the version of the operating system. In the window that opens, select the "Other networks" section.

In the window that opens, select the item "Mobile networks".

It is necessary to put a tick in front of the "Mobile data" item, and then enter the "Access points" section.

After that, the item for creating a new access point is selected.

In the window that opens, go down and select two items: Authentication Type or Authentication Type, and Access Point Type or APN Type.

In the first window, you must select the "PAP" mode.

In the window with the name "Access point type" you need to write a text with the name "default", and then click on confirmation.

After that, in the menu of access points, you can find a new point, which must be selected.

After that, be sure to restart the phone, and after turning it on, make sure that the data transfer mode function is enabled in the settings. Then you can start using the mobile Internet.

Now, in order to access the Internet from your smartphone, you just need to turn on the appropriate "Mobile Internet" mode.

Summing up today's article “how to set up the Internet on your phone”, it remains to add that to access the Internet you will also need to use a special browser, which have the same names as for computers. After opening the browser, the home page should automatically load, which indicates the presence of mobile Internet. If the Internet is not available, make sure that the phone is "catching" the network.

Modern electronics manufacturers strive to make any product "smart", which is confirmed, for example, by Smart-TV technology. After learning from this article how to connect the Internet to an LG TV (webOS), you can not only watch regular TV broadcast, but also run your favorite movies and series online directly from the TV screen or surf the web using the remote control remote control... Including go to Vkontakte, Facebook and other popular resources.

There are two options for connecting LG SmartTV to the World Wide Web: wireless - WiFi and cable - LAN (Ethernet). Each of the methods has advantages and disadvantages, so the choice of the bundle type depends on the user's needs. It is worth noting that cable connection is suitable only for those who are planning to install smart TV at the stage of renovation work in the room and are ready to delve into additional parameters. Wi-Fi technology is the most popular today.

Via network cable

This method is far from the most convenient, as it requires installation works in room. If you already have in your apartment network cable for a WiFi router from a provider, then you will have to carry out the second one: the information flow over one Ethernet channel can be sent to only one device.

Another disadvantage of this method is that modern LG TVs do not support all network standards of domestic providers (among incompatible ones, for example, PPPoE and L2T) - the LV technology simply will not see the wire connected to the Ethernet port, coming directly from the Internet provider.

For these purposes, a router is required, and authorization to the PPPoE server is already performed on it. Do not be afraid, 99.99% that everything will work the first time.

If a cable connection is the only possible solution, then you should be ready to manually set the connection parameters (if DHCP is not running on the router). You will need to write data such as the IP address and DNS servers into the device memory yourself. You may also need to inform the telecom provider of the MAC address of the television device: some providers use this code to identify the device in the system.

Please note that if there is only one LAN cable at home and it is inserted into the LG TV, then you will have to distribute WiFi to other gadgets from Smart-TV. You can find out the compatibility of the device with local standards from the contract or by calling the provider (Dom.Ru, Rostelecom, MTS and others).

Via WiFi

Wirelessly connecting TV to the Internet via a WiFi router will not only take less time, but also more convenient in terms of everyday use. In some cases, it is convenient to use WPS technology to quickly synchronize devices, in more detail in the section below.

The user does not need to pull special wires (called twisted pair) around the apartment or buy additional accessories. You only need a router connected to the network.

An exception to the rule is those LG TV models that do not have a built-in Wi-Fi module, but support Smart-TV technology: you will have to purchase an external network module (for example, LJI AN-WF100). This accessory is inserted into a USB port, pcmcia card (for older models) or C1 connector, and its synchronization by the device is automatic - no one should have any difficulties. The cost of such a module is almost 4000 rubles. You should not try to save money and buy a cheap analogue, since LG TVs are compatible only with adapters from this manufacturer.

Another option for the wireless method is the Ad-Hoc network, the creation of which does not require a WiFi modem. In this case, the TV is connected directly to the computer (local DLNA server) and does not have an Internet connection, but the user is able to broadcast any media files stored in the laptop / / system unit memory on a large TV screen.

Setting up

At the first launch, the new LV TV asks the owner for permission to automatic tuning connections. Practice shows that this notification is often ignored by the user due to his unwillingness to waste time on an “unnecessary” function and the desire to get down to the list of TV channels as soon as possible. If auto-tuning was not performed immediately, then the procedure for further connecting the TV to the global network will consist of such steps as:

1. We launch the device and go to “Settings” using the “Settings” button located on the remote control.
2. Go to the "Network" section (the globe-shaped icon) and the "Network Connection" subsection.
3. Choosing an access source - WiFi wireless technology or LAN cable.
4. We launch autotuning, in the mode of which you only need to enter the password from the WiFi router or press the WPS button on the router. With a cable connection, you must enter all the data yourself.
5. We confirm saving the settings.

Attention! The arrangement of buttons, menus, as well as the interface as a whole, differs greatly from model to model. We recommend that you look at the standard instructions in order to avoid force majeure.

After completing the above algorithm, LG Smart-TV will be connected to the global network and you can enjoy watching online content. If you need to set additional connection parameters (for example, register a static IP address or hidden SSID), the automatic task of the parameters is not your way. For more details and in detail, see the Video, at the end of the article.

Attention! Although manual configuration provides the TV owner with advanced options, this method is recommended only for advanced users who need additional protection of personal information and have at least minimal IT knowledge.

Possible problems

If you have already connected the Internet to SmartTV, but the connection of the device to the network for one reason or another was suddenly interrupted, do not panic and immediately rush to the TV masters for help, you can fix this problem yourself.

The first thing to do is to understand at what stage of the wireless channel binding the failure occurred. To do this, go to "Settings", then - to "Network status". You will see a chain of icons of all devices involved in the Internet connection. The presence of a red check mark next to one of the icons will indicate a “broken” part of the channel. The connection will be restored in one of the following ways:

• if such a symbol appears opposite the TV itself - the matter is in the wrong password for accessing the router - just update the password in the corresponding webOS window;
• when a check mark appears opposite the gateway, you will need to reboot the router;
• dNS malfunction is most likely associated with an error in the MAC address - you will have to contact your provider with a request to update the code in the database.

Problems can occur due to a malfunction of the webOS operating system. To update software it is necessary:

• download the firmware file to your computer;
• upload the update to a flash drive (it must be formatted in FAT32);
• insert the USB flash drive into the USB port of the TV;
• go to "Software update" and start automatic mode;
• agree with the installation of the new firmware.

The system itself will find the required file on the removable disk and install it. After a successful update, re-establish the connection according to the algorithm described in the previous section of the article.

Conclusion

So, there are two ways to connect the Internet to an LG smart TV: using a LAN cable or via wireless WiFi technology. Setting up the webOS television OS will be almost the same for both the first and the second method, and possible problems any user can overcome the connection. If you have any other questions, we recommend watching the video instruction.

Video

So I decided to write this guide to help everyone who wants to use the Internet on their TV. Immediately I draw your attention to the fact that in some TVs, although there is an Ethernet port on the panel, it will not work to connect it to the World Wide Web. for example for flashing a TV ...

I recommend connecting devices such as a TV or a system unit, since a LAN cable, unlike a wireless wi-Fi networks, is less susceptible to external factors and has a higher data transfer rate. Of course, either 802.11ad is not subject to negative external influences, but not all devices can work with these standards. By the way, if you don't want cables to get tangled under your feet, then you can.

So, you can connect your LG TV to the Internet via a LAN cable in such cases:

• if the TV you are using does not have the Wi-Fi function, there is no external auxiliary device (adapter), there is no desire to use a wireless connection to connect to the Internet;
• when there is no network device (modem, router with Wi-Fi function) either, it is not possible to connect the TV to the Internet without using a cable.

We'll look at two configuration options:

1. Internet connection using a router;
2. LAN connection (direct) with a network cable from the provider.

If your TV does not have a PPPoE or L2TP connection (not provided by the design), then it is not yet possible to connect it to the provider's network directly. Also, in the case when the IPoE connection technology (static or dynamic IP) is used, connecting is also not easy. As a rule, such providers bind the Internet to the MAC address of the connected device (computer or TV), but there are still exceptions.

Connecting LG TV to the Internet via a router.

A similar problem can be solved quite easily using a router. This network device allows you to create a home local network and provide Internet to all clients (computer, tablet, smartphone, TV) connected to it. To open the TV access to the Internet, you do not need to make any special router settings, for this it will be enough to activate the DHCP server function in the router settings and connect the TV set in automatic mode (set by default). When using Wi-Fi, accordingly, the wireless network must be configured.

You can connect Smart TV to a router (using a LAN port) using a network cable (called a patch cord), which may come with a TV or router. As a rule, they are delivered short, the longer one (as needed) can be ordered in any specialized salon, store or. It is better to connect with the TV turned on. You should have something like the pictures.

Connect one end of the cable to the router into a free LAN connector.

The second end, the same cable, is connected to the Ethernet port of the TV.

In general, it should look like this: from the provider to the router, from the network device to the TV.

If everything was done correctly, a window should immediately open on the TV screen (quickly close) with a message about the establishment of the required connection. All Smart TV functions should work, your TV is connected to the Internet.

To make sure everything is connected, go to the TV settings by pressing the Settings button (if the remote is Magic Remote, then press the INPUT button and click on the gear sign). Now in the menu select "Network" -\u003e "Wired Ethernet Connection". As you can see, the Internet connection is established.

Directly connect your LG TV to the Internet using a LAN cable.

With this connection option, no auxiliary devices are required, but there are some nuances. Currently, providers use several methods (technologies) of connections:
IP Dynamic and Static;
L2TP and PPPoE.
Depending on the type of connection used, you need to make certain settings on your TV so that it has a network. You can find out which connection method is used in your case in the concluded agreement with the provider or by contacting technical support.

Dynamic IP. In this case, it is very easy to connect the Internet to an LG TV without a router, if the provider uses dynamic IP technology. It is enough to insert the cable of the Internet provider entering the apartment (house) into the network connector of the TV (must be in automatic mode) and the Internet connection will be established.

You don't need to make any additional settings. It is important that Smart TV network parameters are set to “Automatic”.

Static IP. If you are using IP Static connection technology, you need to look at the preset network parameters in the agreement with your service provider and use them when setting up the Internet on your TV. Insert the LAN cable coming from the provider into the Ethernet port of the TV and go to the network settings.

To do this, press the Settings button (on the Magic Remote, press INPUT and click on the gear). Go to "Network" -\u003e "Wired Ethernet connection" and uncheck the "Automatic" option. Thus, we switch to manual control.

Now we register in the fields the IP address, mask, gateway and DNS specified by the provider and click the "Connect" button. It will all look something like this:

• IP address: 192.168.0.102
• Subnet mask: 255.255.255.0
• Gateway: 192.168.0.1
• DNS: 192.168.0.1

After that, Smart TV will gain access to the World Wide Web.

Binding by MAC address. If the ISP uses MAC address binding, and a computer is connected via its LAN cable (tied to the Internet), then setting up the Internet on the TV will be somewhat more difficult. You will need to go to the TV settings (Support, product / service information) and see its MAC address. Then contact the service provider and tell him the new MAC- so that he changed the binding from the computer to the TV.

Sometimes the provider uses PPPoE, L2TP technology, and in this case, it will most likely fail to connect the Internet to the TV via a network cable. Only some TV models can understand PPPoE connection. You need to watch the Smart TV specifications or get information about the network capabilities from the manufacturer. In my opinion, in this case it is better to connect the TV to the Internet using a router. The advantage is obvious.

In my opinion, direct connection (without a router) is the most inconvenient ... To access the global network, for example, from a tablet, smartphone or laptop, you will have to distribute Wi-Fi from the TV, and you can forget about connecting devices via LAN. As you can imagine, in this sense and not only Smart TV loses to a network device. While!

Many users can no longer imagine life without modern communication methods. Messengers, YouTube, calling apps and quick access to any information are just a few of what a simple Internet connection offers. The technology allows you to meet your needs 100%. But often users do not understand how to set up the Internet on their phone, or they do everything correctly, but errors occur.

We will give you simple instructions to help you set up the Internet on any phone, no matter what operator mobile communications you have not used. However, first proceed with the recommendations only if the standard configurations do not work for you.

How do I set up Wi-Fi?

Usually everyone tries to connect to the Internet using the Wi-Fi module. It's free, you have unlimited traffic and excellent speed of sending and receiving data. With home networks, everything is simple, since you know the password for them, but with others it is not so easy. Public networks (which do not ask for an access code) are not everywhere, but for others you need to know the password. If you are sitting in an institution and there is a closed network, find out the combination for connecting from the workers.

To activate Wi-Fi, do the following.

Attention! Some networks require you to sign in. Follow the onscreen instructions and you should be good to go.

Remember that through public networkswho do not have a password, you should not make purchases on the Internet or go to accounts on various sites. Your signal can be easily intercepted, your login details or bank card information stolen.

If after these simple manipulations you have problems, then read our about how to solve them and get the device to connect to the access point.

How do I start using mobile data?

Tune mobile Internet can be done through the "Settings" tab. However, this usually does not have to be done. Almost always, the operator sends them automatically. Immediately after installing the card and the first launch, you just need to activate the mobile Internet in the quick settings panel in the blind. Then the smartphone will do everything itself and let you into the network.

If it was not possible to connect automatically, you can set up the Internet on Android yourself.

Attention! If your SIM card is outdated for the 4G network, then it will be changed for you in the communication salon for free or at a low cost.

Also, in order to manually configure the Internet on a new phone, you need to select a suitable tariff plan, which would favorable conditions provided you with traffic. You can order it by calling the operator or in any communication salon. And do not forget to regularly replenish your account, otherwise you will no longer be charged traffic.

Configuring APN on Android

Unfortunately, it is not always possible to quickly connect to the Internet on a smartphone. First, you need to study the terms of your tariff plan. It can be viewed on the Internet or by calling the telecom operator. Also, to make changes, you need to find out a number of parameters that we have collected for you in the tables below.

Now you should fill in correctly required fields... All the data that you need to enter, we have indicated below, copy the information to the new APN, and then save the access point.

Check that the mark is opposite the desired item. The type of connection to the Internet: LTE or 3G is regulated in the previous menu, and also depends on what options are provided by the telecom operator.

For Russia

For Ukraine

Deleting configurations

If you no longer need to connect to a point, you can quickly delete it or reset the parameters.

1. Open the Internet configuration menu as described in the second paragraph of the instructions above.
2. To delete an APN, open it, click on three dots and tap on "Delete APN".
3. To reset the settings, go to the "Access points" section, click on the same three points and select "Reset settings".

In these ways, you can customize the Internet on a Chinese phone or any other. But remember that before moving on to manual settings, try to start using automatic settings, which almost always work correctly on all devices.

Capabilities modern internet simply amaze the imagination, now every owner of a smartphone or tablet can easily surf sites, communicate in social networks and even play online games. Having bought a gadget with the function of a faster and more perfect 3G Internet, the owner of the device does not know how to enable 3G on LG, we have devoted this review to the answer to this question.

In most cases, the 3G high-speed Internet mode is already active on the smartphone, if, of course, it supports this function. Also, the SIM card from the operator should also have the appropriate functionality. cellular communication... Both of these conditions are required, otherwise, you will not be able to use 3G at all, so when buying a smartphone and a SIM card, make sure that they support this possibility.

If the signal is good, you will see the inscription “3G” next to its indicator, which means that the service is active and you can use all the functions of your phone to the fullest. If this icon does not appear, go to the settings of your smartphone, activate high speed internet it will be possible here.

• If, when trying to access the network, the phone constantly gives an error and you cannot solve the problem on your own, contact the LG service center for professional help. So you will receive a full list of services: hardware diagnostics and repair of all models of LG smartphones.

This instruction will allow you to enable 3G on any LG smartphone, the main condition for the device to work on the basis of the android operating system.

Go to the phone menu, usually a gear icon. Here you need to select "MORE", it is in the first column with headings, go to "mobile network". IN this section you can see various additional settings networks, including "setting up 3G". Click on this section and proceed to the selection of parameters.

Here you will see such operating modes of the gadget as: GSM only, UMTS only, UMTS / GSM (automatically). It would be best to check the box next to the last mode, however, if you are absolutely sure about high quality signal, you can set "only UMTS", that is, only the maximum speed of the Internet connection.

In the case of activating the "GSM only" mode, the Internet speed will be very slow, but the cellular signal level will become maximum.

I hope this instruction helped you in solving the task, and you were able to enable 3G on your smartphone yourself.