Where is the access point on the iPhone. How to make a Wi-Fi hotspot out of an iPhone. Data transfer methods

The ability to make an access point from an iPhone or iPad on iOS 7 will allow using the Wi-Fi protocol (there is also the possibility of using Bluetooth and USB) to distribute the Internet received over the network cellular operator, to your desktop computer or any mobile device. Modern mobile Internet in third or fourth generation networks has a fairly decent speed, therefore it will make it possible full work with data from the Internet anywhere in the city without the need for constant search public networks Wi-Fi.

So how do you make an iOS 7 hotspot from your iPhone and iPad?

1. Go to the "Settings" application of the iOS 7 operating system on the iPhone or iPad, go to the "Cellular" menu:

2. By switching the switches to active mode, enable the ability to transfer cellular data through the mobile networks of the operator, as well as, if necessary, use 3G or 4G:

3. Go to the "Modem Mode" menu of the "Settings" application of the iOS 7 operating system on the iPhone and iPad:

4. Set up a password for connecting to an access point created using an iPhone or iPad, and confirm the entry with the "Finish" key:

5. Move the switch of the "Modem mode" item to the active position:

When connecting mobile devices or a desktop computer to an iPhone or iPad, which acts as an access point, an indication will appear on it in the form of a blue line under the operating system status bar (it will show the number of connected devices):

Thus, without any additional software, you can turn an iPhone or iPad running the iOS 7 operating system into an access point through which the mobile Internet received via cellular networks will be distributed by means of the Wi-Fi protocol (there are also options with Bluetooth and USB) telecom operator. Such a solution will make it possible to use data from the Internet anywhere, eliminating the need to search for public Wi-Fi networks.

Today, in almost any restaurant, cafe or entertainment center you can connect to the Internet for free via a wifi hotspot. However, sometimes there are situations when, for some reason, in public place no network access. If you have a laptop or smartphone from Apple iPhone, you can work around this problem. This phone can connect to the Internet using 3G or LTE standards.

Sharing Internet from iPhone

To activate in an Apple smartphone the ability to distribute by wifi internet you must first enter the settings and enable "3G", "Cellular data" and "4G / LTE" if this standard is supported by your phone model. This format will make it possible to transfer data much faster.

After that, select the "Modem mode" menu item and activate this setting. Now the iPhone smartphone will be able to distribute the Internet via wifi. It does this by allowing the phone to operate as a wireless modem. If there is no such item as "Modem mode" in the smartphone settings menu, then you must enter the "Cellular" section. Here you can see all the settings that the phones use to use mobile internet... Similar information is also available on the official page of each operator. cellular communicationWhose SIM card is installed in the device.

Here the owner of the smartphone will see three lines, namely: "APN", "Username" and "Password". Further below is the item "Modem mode". You need to select this part of the menu and copy here the information from the lines "APN", "Username" and "Password".

After entering this information, under the line "Cellular" in the previous section of the phone settings, the inscription "Modem mode" should also appear. By default, this option is disabled. The user needs to move the slider and thereby.

It will be by the way to say that under the line for enabling the phone's mode of operation as a modem, you can see a brief instruction on how to configure the distribution of the mobile Internet via wifi by the device.

In addition, in this part of the settings, you can set a password for connecting to the wifi network of other devices. To do this, select the line "Wi-Fi Password" and in the window that opens, enter a combination of eight characters using the graphical keyboard.

Upon completion of these simple manipulations, the iPhone will switch to operating mode as a modem and will be able to provide Internet access to other devices connected via wifi to this unit. To join the formed network, the user of another phone, tablet or computer will need to select in the settings required connection and enter the password set by the iPhone owner.

Content

With a lot of traffic or unlimited internet it is convenient to use the iPhone as a modem. This allows you to share extra megabytes with owners of other devices running both iOS and Android. There are several ways to solve this problem.

IPhone tethering

Support for this mode appeared in iPhone 3 models. Thanks to him, the iPhone (iPhone) or iPad (iPad) connects to mobile network transfers when there is no access to wi-Fi networks... Located "Modem Mode" in the settings menu. If it was not there, you can activate the mode as follows:

  • Open the "Settings" menu and select "Cellular". The figure below shows how the item should look if there is a mode. (fig. 1)
  • Place the Cellular Data slider in the on state.
  • In the opened section "Cellular data" enter APN, username, password. The values \u200b\u200bfor these fields are indicated on the official website of your operator. (fig. 2)

This completes the activation of the mode. There is no significant difference in the features of its inclusion on different iPhone models.

How to share internet from iPhone

If you have unlimited tariff, you can distribute the Internet from the iPhone in one of 3 ways: via Wi-Fi, Bluetooth or using a USB cable. Each option has its own characteristics.

Via Wi-Fi

This option is convenient and relatively simple. To share Wi-Fi from iPhone, follow a few steps:

  • Find the "Settings" section in the phone menu. Select the "Cellular" tab there. In the window that opens, enable 3G / 4G network support to increase the data transfer speed to the maximum. (fig. 3)

  • After turning on the transmission of cellular data, the "Modem mode" tab is activated. Open it to enter the password for the Wi-Fi network. It must be at least 8 characters long. (fig. 4)

  • Click "Turn on Wi-Fi and Bluetooth" and try to connect to the created modem from another smartphone. To do this, use the password entered when activating the modem mode. (fig. 5)

Via bluetooth

An alternative option for creating an access point on an iPhone for distributing Wi-Fi is to use Bluetooth mode. To connect it, follow the instructions:

  • To activate "Modem Mode", follow all the steps described in the previous instructions. Then turn on Bluetooth by moving the slider to the right. (fig. 6)

  • Pair your iPhone with another device (iOS or Android). To do this, click "Create a pair" and enter the password that will be displayed on the other gadget.
  • When the connection between the devices is established, go to "Settings". (fig. 7)

  • In the window that opens, put a tick in the "Internet Access" checkbox. After that, distribution of Wai-Fai will begin. (fig. 8)

Via USB cable

The iPhone can also be used as a USB modem connected to a computer or laptop. To distribute Wai-Fai to others mobile devices this way, do the following:

  • Connect your smartphone to a Windows PC (personal computer) by selecting "USB only". (fig. 9)

  • The system should automatically recognize the iPhone and place it in the "Network adapters". If not, restart your PC.

Important: for the system to detect the iPhone, and the drivers are installed correctly, the latest version of iTunes must be installed on the computer.

If you are a happy owner of an iPhone, you can also use your gadget as a modem. It is also allowed to connect to the network via Wi-Fi, where the device will be an access point, as well as via Wi-Fi.

In this article, we will tell you how to turn on the modem mode on the iPhone 7. Let's see how to use the iPhone and distribute the Internet from it, working with different versions of the "operating systems" of a PC or laptop.

Note that sometimes telecom operators can block such a mechanism for accessing the network. This means using more than one device. But in Russia, this occurs in isolated cases, and there are no problems with how to distribute WiFi from an iPhone among residents of our country.

But if you cannot start the modem function on an iOS gadget, despite all the actions, it does not work, contact the communication company. Ask if a similar service is available. And our article will tell you how to solve such a problem as the loss of the modem mode from the device settings after the system update.

To this end, you need to enter the cellular settings and check that the cellular data transfer point is turned on. If this option is not activated, the desired mode will not be shown in the settings.

If during the activation process Wi-Fi and Bluetooth are not turned on, the system will prompt you to do so. Then it will be possible to use the device as a modem and through these channels. At the bottom, you can type in your password characters if you plan to use wireless networks.

Now you know how the Internet is with Phone. In just a couple of simple steps, your device has turned into a WiFi distributor.

How to share Internet for Windows

Let's start with this "operating system" for the reason that it is most often installed on PCs and laptops. In our example, we will use windows version 10 and an iOS device with version 9 operating systems. However, note that on devices with other OS versions the steps will not differ much.

Internet shared via USB

To use an iOS gadget as a modem, you must have the iTunes utility on your PC. It is important that the USB cable is not a Chinese counterfeit, but an original accessory. Let us remind you that the utility should be the most recent version. If these two simple conditions are not met, errors may appear in the process or the connection will not work at all.

If everything is fine, you will need to activate the modem mode on the device and connect it to the PC via the USB cable. If the display prompts you to trust this PC, you need to give a positive answer. Otherwise, the regime will not work. This message usually always appears the first time you connect the device.

After a short period of time, a new connection will appear on the PC via the local network with the name "Apple Mobile Device Ethernet". From now on, the network should be available. To evaluate the connection, you need to click on the corresponding picture in the taskbar. You need to enter the network control center, in the item for changing adapter parameters. Here you will find a list of all connections.

How to share Wi-Fi from an iOS device

If you have successfully activated the modem mode, and Wi-Fi on the OS gadget is also enabled, you can use it as an access point. To do this, you just need to connect to the network using the name Phone. You need to drive in the password. Which is in the modem mode settings. You can also come up with your own character set.

Usually this type of connection is done without difficulty. The Internet instantly appears on a PC or laptop. But on condition that the computer interacts with other access points without problems.


We use for Bluetooth connection

In this case, pairing will be required in the "operating system" of a PC or laptop. Of course, Bluetooth itself must be active on both the iOS gadget and the PC. Adding a device is possible using various methods:

  • Clicking the corresponding icon on the notification item and selecting the add Bluetooth device item.
  • By entering the control panel, to the devices and printers item, by clicking on the section for adding devices (located at the top).
  • By entering the parameters, then to the devices section, and selecting Bluetooth. The search will start automatically.

When the iOS gadget is detected by the system, depending on the method used, click on its icon and then "Link" or "Next".

Select pairing in the corresponding request on the gadget display. A match request will pop up on a PC or laptop secret code with the same element on a mobile device. But on the display of the gadget you will not find such a code. With all this, you need to answer in the affirmative, and it is following this order - first on a PC, and then on an iPhone.

Then go to network connections on your PC or laptop and select Bluetooth connection. It is possible that it already exists - then no action is required.

Details Category: Settings, instructions for iPad. Published: 12.09.2013 10:34 iPad or iPhone to other devices? With the release of version 6.0.1 of the operating systemiOS this opportunity has appeared, and now you can use youri -devices as an access point. True, the ownersiPad 2 may get upset because their device does not officially support the so-called. "Modem mode".

There is a particular difference in the settings of this mode foriPad and iPhone no, except for the location of the menu items. So here the necessary conditions to be able to use the device in modem mode:

IOS version not lower than 6.0.1. To be sure, just update to the latest version. To find out what version you have, go to “Settings - General - Software Update”. The system will check for updates itself. Here you can also update to the latest version;

Make sure your device is equipped with 3G / LTE module and there is a working SIM card in it.

If all conditions are met, then for setting regime in iPhone go to Settings - General - Cellular Data - Cellular Data Network. For settings regime in iPadthe path is a little shorter: Settings - Cellular Data - SettingsAPN.

It should be noted that if you have updated to the latest versioniOS , then, most likely, the settingsAPN for your mobile operator will appear automatically. I personally neitheriPad or iPhone i did not write these settings with pens.

If the settings are empty, then, depending on which operator's SIM card you have, you should register them manually:

Megaphone
APN: internet
Username: leave the field blank
Password: leave the field blank

Beeline
APN: internet.beeline.ru
Username: beeline
Password: beeline

MTS
APN: internet.mts.ru
Username: mts
Password: mts

Further in the settings we find the item "Modem mode" and turn it on. To do this, you need to activate at leastWi - Fi. If Wi-Fi will be disabled, then when you enable this mode you will be prompted to activateWi - Fi and Bluetooth.

Here, in the "Modem Mode" settings, you can assign a password to access the access point created by your device so that no stranger accidentally connects to your network.

Now all that remains is to connect your other device to the created network. For example, to connectiPad just activate on itWi-Fi and choose a network. I turned on "Modem mode" (and distributed the Internet) oniPhone , and connected to itiPad. Therefore on iPad the available network was callediPhone 77.

If the connection to the access point is successful, then, for example, in the upper left corneriPad this icon will appear in the form of two rings:

If you have any questions, feel free to ask them in the comments.